> On 24 Sep 2020, at 17:05, Max Orok <[email protected]> wrote: > > Hi Zuheyr, > > You can use the option Geometry.OCCInputScaling: > > Geometry.OCCScaling > Scale STEP, IGES and BRep models by the given factor when importing them with > the OpenCASCADE kernel > Default value: 1 > Saved in: General.OptionsFileName > > Given in the geometry options list: > http://gmsh.info/dev/doc/texinfo/gmsh.html#Geometry-options-list >
As an alternative, you can also leave the geometry as-is, and specify Mesh.ScalingFactor to save the scaled mesh. Christophe > Sincerely, > Max > > On Thu, Sep 24, 2020 at 6:31 AM Zuheyr Alsalihi <[email protected]> wrote: > Dear Prof. Geuzaine and gmsh experts, > > I am using gmsh-4.5.6-Linux64. If I read a CAD step file in mm, and if I want > to make a mesh in meters, > what should I do? Thank you so much for reading. > > Best, Zuheyr _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh > > > -- > Max Orok > Contractor > www.mevex.com > > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
