Erwan Lerale wrote:
Zhang Le wrote:
I have attached my xorg.conf and Xorg.0.log.
Thanks ! I don't see big differences with mine... except this :
(II) SMI(0): Output LVDS using monitor section Generic Monitor
(II) SMI(0): Output VGA has no monitor section
(II) SMI(0): I2C device "I2C bus:E-EDID segment register" registered
at address 0x60.
(II) SMI(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(--) SMI(0): No DDC signal
(II) SMI(0): Output LVDS connected
(II) SMI(0): Output VGA connected
(II) SMI(0): Using user preference for initial modes
(II) SMI(0): Output LVDS using initial mode 1024x600
(II) SMI(0): Output VGA using initial mode 1024x768
(==) SMI(0): DPI set to (96, 96)
Really weird...
Ok it's working now !
Don't attempt monitor detection on SM712 :
http://cgit.freedesktop.org/xorg/driver/xf86-video-siliconmotion/commit/?id=41e5c49024d4e27a7be3da02017000a22b59016f
but even after this, it was still flickering...
Francisco has debug the problem. 1000 thanks to him !
Widen the pixel clock readjust interval for SM712.
http://cgit.freedesktop.org/xorg/driver/xf86-video-siliconmotion/commit/?id=962e0c4f08180ac51994aef8d6d042108d5841c1
Erwan
_______________________________________________
gNewSense-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/gnewsense-dev
