> Message: 1 > Date: Mon, 25 Jan 2010 23:12:29 +0100 > From: Sam Geeraerts <[email protected]> > Subject: Re: [gNewSense-users] lemote does not boot after install > To: gNS users list <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset=UTF-8; format=flowed
> Press del key upon powerup. On PMON type... > > load (usb0,0)/boot/vmlinux-2.6.31.6-libre1 > initrd (usb0,0)/boot/initrd.img-2.6.31.6-libre1 > g console=tty no_auto_cmd root=/dev/hda1 rootdelay=8 machtype=8.9 > > It boots with the installed OS. When done open a terminal and type: Following the instructions on the wiki, I don't have a initrd.img-2.6.31.6-libre1 file on my USB. I have 2 files: vmlinux-2.6.31.6-libre1 initrd.gz I tried "load (usb0,0)/vmlinux-2.6.31.6-libre1" and that seemed to be fine. Then "initrd (usb0,0)/initrd.gz" and that didn't give me an error but I don't know if this is what I'm to do (I suspect this is where I'm going wrong...should I be running initrd on a .gz file?). Then "g console=tty no_auto_cmd root=/dev/hda1 rootdelay=8 machtype=8.9" simply runs the installation process again. But gNS is already installed. I don't want to install it again. I guess I'm confused as to how the initrd.img-2.6.31.6-libre1 file ever made it to the USB along with it being in a /boot directory. _______________________________________________ gNewSense-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/gnewsense-users
