Here's exactly what happens: PMON> load (usb0,0)/vmlinux-2.6.31.6-libre1 Loading file: (usb0,0)/vmlinux-2.6.31.6-libre1/(elf) (elf) 0x80200000/3555840 + 0x80564200/286128(z) + 6815 syms\ Entry address is 802063c0
PMON> initrd(usb0,0)/initrd.gz Loading initrd image (usb0,0)/initrd.gz(bin) #This process takes a few minutes with a twirling backslash/frontslash on the right side of the screen and then... Loaded 5259509 bytes PMON> g console=tty no_auto_cmd root=/dev/hda1 rootdelay=8 machtype=8.9 And here I get a lot of output I can't repeat along with a Tux the penguin logo and eventually I'm taken to the first step of the installation process (Choose language) instead of the installed gNS on my system. According to dir (wd0,0)/ I have a system installed as it lists all the typical directories starting with lost+found, var, etc... all the way through to opt. On Wed, Jan 27, 2010 at 10:52 AM, Quiliro Ordóñez <[email protected]> wrote: >>>> >>>> I tried "load (usb0,0)/vmlinux-2.6.31.6-libre1" and that seemed to be fine. >>>> Then "initrd (usb0,0)/initrd.gz" and that didn't give me an error but >>>> I don't know if this is what I'm to do >>> >>> I am very very sorry. the initrd line should read: >>> >>> initrd (wd0,0)/initrd.gz >> >> Wait a minute..... The previous one was correct! >> > > initrd (usb0,0)/initrd.gz > > is correct! > _______________________________________________ gNewSense-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/gnewsense-users
