On Fri, 5 May 2000 [EMAIL PROTECTED] wrote:
> I have the simplest network imaginable. Two boxes hooked together with
> two Realtek NE2000 ISA 10Base2/T cards. One is a Windows box and the
> other is dual boot. They both communicate and ping in the Windows mode,
> but now I want to connect in the mixed mode. I'm using RH 5.2. Loop
> back works fine, but I can not ping anything else.
Check the output of dmesg(8) to make sure the ethernet card driver is
initializing properly, picking the right IRQ, media type, etc.
Check the output of ifconfig(8) to make sure the ethernet interface is up
and configured properly.
Check the output of route(8) and make sure the proper routes exist, and do
not conflict.
Check the output netstat(8) ("netstat -ap" works well) for any clues.
You might want to try upgrading to a newer release of Red Hat, or at the
very least, upgrading your kernel.
If it still doesn't work, post the output of the above commands some place,
and we can take a look.
--
Ben Scott <[EMAIL PROTECTED]>
Net Technologies, Inc. <http://www.ntisys.com>
Voice: (800)905-3049 x18 Fax: (978)499-7839
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
