Check the SMB-HOWTO on www.linuxdoc.org
Especially note the part about how you need to make a change in the
registry's of the Win systems that you will be mounting your linux drive(s) on.
There are three RPM's you need to install. They are all called samba-*.rpm
Whenever you make changes to your /etc/smb.conf file you'll need to
restarts smbd.
To restartd SMB, use the commands:
$ /etc/rc.d/init.d/smb stop
$ /etc/rc.d/init.d/smb start
Hope this heolps... check the Howto.
At 01:49 PM 10/13/2000 -0400, you wrote:
>I am new to Linux and would like to setup Samba on a machine running RH
>6.2. Can anyone recommend a good website or book to help me properly
>setup Samba? This machine is not connected to the outside world, but some
>machines on the network are connected via cable internet access. What
>would you recommend reading to learn proper systems administration
>(Security in particular) for Linux? Thank you for help or direction you
>can offer me.
>
>
>Thank You,
>
>Sean Goodell
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
