> And problem number two, I want to set this machine up as a gateway
> and I cant get it to recognize my second card. The card is a
> tulip based netgear FA310Tx. On boot i get the message "eth1:
> Delaying initialization SIOCADDRT: Device not found [FAILED]" Can
> anyone get me in the right direction for getting this card to work?
> the working card in my machine is a linksys lne100tx which I happen
> two of, so i put the second linksys in and still got that error,
> so i just put the fa310tx back in.
FYI, my firewall system has a 3c509 talking to my cable modem
and an 8013 serving my internal network. I compile both drivers
into the kernel statically (as opposed to using modules) and
the only way I can force the kernel to recognize the cards
in the desired order with the desired IO/IRQ parameters is to
tell LILO to start the kernel with this command line:
append="ether=0xa,0x300,eth0 ether=0xf,0x340,eth1"
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
