Looking at the output, there are some lines:
'{0142}" does not map to cp850 at C:/Strawberry/perl/lib/ExtUtils/Make'I wonder if this isn't related to the changes made to accommodate installation folders with accented characters!?! ----- Regards, Pedro Albuquerque Join StarLink Em 07/10/2026 às 14:47, "Pedro Albuquerque via gnucash-user" <[email protected]> escreveu: >Murugan, > >OK, after uninstalling 1st Strawberry and reinstalling it, I have folders inside those you mentioned. > >Trying to run 'Install Online Price Retrieval' still doesn't find the Perl script, which leads me to believe, since I don't have GnuCash installed in the default folder, that script might need some paths adjusted. > >I did run the script manually, but the splash still says it is impossible to load F::Q. > >Thank you for your time! > >----- >Regards, >Pedro Albuquerque >[Join StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) > >Em 07/10/2026 às 11:16, Murugan Mariappan <[email protected]> escreveu: > >> Hi Pedro, so Strawberry is not installed. Please download https://strawberryperl.com/ and install Strawberry first. Then go for install price quote >> >> Saludos Cordiales >> >> Murugan >> >> --------------------------------------------------------------- >> >> From: Pedro Albuquerque <[email protected]> >> Sent: 07 October 2026 11:13 >> To: Murugan Mariappan <[email protected]> >> Cc: [email protected] <[email protected]> >> Subject: Re[2]: [GNC] Problem with Finance::Quote >> >> Hello Murugan, >> >> I have 'C:\Strawberry\perl\site\lib\', but it is empty. 'C:\Strawberry\perl\site\bin\' is also empty. >> >> ----- >> Regards, >> Pedro Albuquerque >> [Join StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) >> >> Em 07/10/2026 às 11:10, Murugan Mariappan <[email protected]> escreveu: >> >>> Hi Pedro >>> >>> Can you check C:\Strawberry\perl\site\lib\Finance and confirm Quote folder is appearing. After you install online price retrieval. If you see the folders, then restart GNU Cash and fetch the prices >>> >>> Saludos Cordiales >>> >>> Murugan >>> >>> --------------------------------------------------------------- >>> >>> From: gnucash-user <[email protected]> on behalf of Pedro Albuquerque via gnucash-user <[email protected]> >>> Sent: 07 October 2026 10:59 >>> To: Wm Tarr <[email protected]> >>> Cc: [email protected] <[email protected]> >>> Subject: Re: [GNC] Problem with Finance::Quote >>> >>> Thank you for your time, I'll google for some more ideas. >>> >>> ----- >>> Regards, >>> Pedro Albuquerque >>> [Join StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) >>> >>> Em 07/10/2026 às 10:46, Wm Tarr <[email protected]> escreveu: >>> >>>> I've run it here just to check and it has worked so I'm out of ideas, sorry. >>>> >>>> Wm >>>> >>>> On 2026-10-07 10:08, Pedro Albuquerque wrote: >>>> >>>>> Done, result below: >>>>> >>>>> >>>>> ----- >>>>> Regards, >>>>> Pedro Albuquerque >>>>> [Join StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) >>>>> Em 07/10/2026 às 10:00, "Wm Tarr" <[email protected]> escreveu: >>>>>>If you don't use strawberry for anything else try deleting >>>>>> >>>>>>C:\Strawberry >>>>>> >>>>>>and running "Install online price retrieval" again >>>>>> >>>>>>Wm >>>>>> >>>>>>On 2026-10-07 09:48, Pedro Albuquerque via gnucash-user wrote: >>>>>>> Hello, >>>>>>> >>>>>>> I'm trying to install Finance::Quote under Windows 10 Home 22H2. >>>>>>> >>>>>>> Using the included 'Install Online Price Retrieval...' as administrator didn't work, so I tried running 'perl gnc-fq-update'. also as administrator. I got a bunch of errors, output of the command is below. I tried running that 'o conf...' but it isn't recognized. >>>>>>> >>>>>>> Can someone please tell me what am I doing wrong here? Thank you in advance. >>>>>>> >>>>>>> [Perl] This is perl 5, version 38, subversion 2 (v5.38.2) built for MSWin32-x86-multi-thread-64int >>>>>>> >>>>>>> [gnc-fq-update] >>>>>>> Starting with version 2.29 of the cpan shell, a new download mechanism >>>>>>> is the default which exclusively uses cpan.org as the host to download >>>>>>> from. The configuration variable pushy_https can be used to (de)select >>>>>>> the new mechanism. Please read more about it and make your choice >>>>>>> between the old and the new mechanism by running >>>>>>> >>>>>>> o conf init pushy_https >>>>>>> >>>>>>> Once you have done that and stored the config variable this dialog >>>>>>> will disappear. >>>>>>> >>>>>>> Starting with version 2.29 of the cpan shell, a new download mechanism >>>>>>> is the default which exclusively uses cpan.org as the host to download >>>>>>> from. The configuration variable pushy_https can be used to (de)select >>>>>>> the new mechanism. Please read more about it and make your choice >>>>>>> between the old and the new mechanism by running >>>>>>> >>>>>>> o conf init pushy_https >>>>>>> >>>>>>> Once you have done that and stored the config variable this dialog >>>>>>> will disappear. >>>>>>> >>>>>>> Starting with version 2.29 of the cpan shell, a new download mechanism >>>>>>> is the default which exclusively uses cpan.org as the host to download >>>>>>> from. The configuration variable pushy_https can be used to (de)select >>>>>>> the new mechanism. Please read more about it and make your choice >>>>>>> between the old and the new mechanism by running >>>>>>> >>>>>>> o conf init pushy_https >>>>>>> >>>>>>> Once you have done that and stored the config variable this dialog >>>>>>> will disappear. >>>>>>> >>>>>>> Starting with version 2.29 of the cpan shell, a new download mechanism >>>>>>> is the default which exclusively uses cpan.org as the host to download >>>>>>> from. The configuration variable pushy_https can be used to (de)select >>>>>>> the new mechanism. Please read more about it and make your choice >>>>>>> between the old and the new mechanism by running >>>>>>> >>>>>>> o conf init pushy_https >>>>>>> >>>>>>> Once you have done that and stored the config variable this dialog >>>>>>> will disappear. >>>>>>> >>>>>>> Starting with version 2.29 of the cpan shell, a new download mechanism >>>>>>> is the default which exclusively uses cpan.org as the host to download >>>>>>> from. The configuration variable pushy_https can be used to (de)select >>>>>>> the new mechanism. Please read more about it and make your choice >>>>>>> between the old and the new mechanism by running >>>>>>> >>>>>>> o conf init pushy_https >>>>>>> >>>>>>> Once you have done that and stored the config variable this dialog >>>>>>> will disappear. >>>>>>> Database was generated on Wed, 07 Oct 2026 06:07:17 GMT >>>>>>> >>>>>>> Starting with version 2.29 of the cpan shell, a new download mechanism >>>>>>> is the default which exclusively uses cpan.org as the host to download >>>>>>> from. The configuration variable pushy_https can be used to (de)select >>>>>>> the new mechanism. Please read more about it and make your choice >>>>>>> between the old and the new mechanism by running >>>>>>> >>>>>>> o conf init pushy_https >>>>>>> >>>>>>> Once you have done that and stored the config variable this dialog >>>>>>> will disappear. >>>>>>> Test2 is up to date (1.302225). >>>>>>> Running install for module 'Finance::Quote' >>>>>>> Checksum for C:\STRAWB~1\cpan\sources\authors\id\B\BP\BPSCHUCK\Finance-Quote-1.71.tar.gz ok >>>>>>> Configuring B/BP/BPSCHUCK/Finance-Quote-1.71.tar.gz with Makefile.PL >>>>>>> Checking if your kit is complete... >>>>>>> Looks good >>>>>>> Generating a gmake-style Makefile >>>>>>> Writing Makefile for Finance::Quote >>>>>>> Writing MYMETA.yml and MYMETA.json >>>>>>> BPSCHUCK/Finance-Quote-1.71.tar.gz >>>>>>> C:\Strawberry\perl\bin\perl.exe Makefile.PL -- OK >>>>>>> Running make for B/BP/BPSCHUCK/Finance-Quote-1.71.tar.gz >>>>>>> ---- Unsatisfied dependencies detected during ---- >>>>>>> ---- BPSCHUCK/Finance-Quote-1.71.tar.gz ---- >>>>>>> Module::CPANTS::Analyse [build_requires] >>>>>>> Readonly [requires] >>>>>>> Smart::Comments [requires] >>>>>>> String::Util [requires] >>>>>>> Test::Kwalitee [build_requires] >>>>>>> Test::Perl::Critic [build_requires] >>>>>>> Web::Scraper [requires] >>>>>>> YAML::PP::Perl [requires] >>>>>>> Running install for module 'Module::CPANTS::Analyse' >>>>>>> Checksum for C:\STRAWB~1\cpan\sources\authors\id\I\IS\ISHIGAKI\Module-CPANTS-Analyse-1.03.tar.gz ok >>>>>>> Configuring I/IS/ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz with Makefile.PL >>>>>>> Checking if your kit is complete... >>>>>>> Looks good >>>>>>> Generating a gmake-style Makefile >>>>>>> Writing Makefile for Module::CPANTS::Analyse >>>>>>> Writing MYMETA.yml and MYMETA.json >>>>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>> C:\Strawberry\perl\bin\perl.exe Makefile.PL -- OK >>>>>>> Running make for I/IS/ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>> cp lib/Module/CPANTS/Kwalitee/Distros.pm blib\lib\Module\CPANTS\Kwalitee\Distros.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Manifest.pm blib\lib\Module\CPANTS\Kwalitee\Manifest.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/FindModules.pm blib\lib\Module\CPANTS\Kwalitee\FindModules.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Repackageable.pm blib\lib\Module\CPANTS\Kwalitee\Repackageable.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/CpantsErrors.pm blib\lib\Module\CPANTS\Kwalitee\CpantsErrors.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Pod.pm blib\lib\Module\CPANTS\Kwalitee\Pod.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee.pm blib\lib\Module\CPANTS\Kwalitee.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/NeedsCompiler.pm blib\lib\Module\CPANTS\Kwalitee\NeedsCompiler.pm >>>>>>> cp lib/Module/CPANTS/Analyse.pm blib\lib\Module\CPANTS\Analyse.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/BrokenInstaller.pm blib\lib\Module\CPANTS\Kwalitee\BrokenInstaller.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/MetaYML.pm blib\lib\Module\CPANTS\Kwalitee\MetaYML.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Distname.pm blib\lib\Module\CPANTS\Kwalitee\Distname.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Files.pm blib\lib\Module\CPANTS\Kwalitee\Files.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/License.pm blib\lib\Module\CPANTS\Kwalitee\License.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Prereq.pm blib\lib\Module\CPANTS\Kwalitee\Prereq.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Version.pm blib\lib\Module\CPANTS\Kwalitee\Version.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Uses.pm blib\lib\Module\CPANTS\Kwalitee\Uses.pm >>>>>>> cp lib/Module/CPANTS/Kwalitee/Signature.pm blib\lib\Module\CPANTS\Kwalitee\Signature.pm >>>>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>> C:\STRAWB~1\c\bin\gmake.exe -- OK >>>>>>> Running make test for ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>> "C:\Strawberry\perl\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib\lib', 'blib\arch')" t/*.t t/*/*.t >>>>>>> t/00_load.t .............. ok >>>>>>> t/05_testdir.t ........... ok >>>>>>> t/05_testfile.t .......... ok >>>>>>> t/analyse/manifest.t ..... >>>>>>> Dubious, test returned 1 (wstat 256, 0x100) >>>>>>> Failed 1/14 subtests >>>>>>> t/analyse/pod.t .......... ok >>>>>>> t/analyse/uses.t ......... ok >>>>>>> t/older_test_kwalitee.t .. ok >>>>>>> t/x_cpants.t ............. ok >>>>>>> >>>>>>> Test Summary Report >>>>>>> ------------------- >>>>>>> t/analyse/manifest.t (Wstat: 256 (exited 1) Tests: 14 Failed: 1) >>>>>>> Failed test: 13 >>>>>>> Non-zero exit status: 1 >>>>>>> Files=8, Tests=54, 8 wallclock secs ( 0.05 usr + 0.12 sys = 0.17 CPU) >>>>>>> Result: FAIL >>>>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>> C:\STRAWB~1\c\bin\gmake.exe test -- NOT OK >>>>>>> //hint// to see the cpan-testers results for installing this module, try: >>>>>>> reports ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>> Stopping: 'install' failed for 'Module::CPANTS::Analyse'. >>>>>>> JSON::Parse is up to date (0.62). >>>>>>> >>>>>>> ----- >>>>>>> Regards, >>>>>>> Pedro Albuquerque >>>>>>> [Join StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) >>>>>>> >>>>>>> _______________________________________________ >>>>>>> gnucash-user mailing list >>>>>>> [email protected] >>>>>>> To update your subscription preferences or to unsubscribe: >>>>>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>>>>> ----- >>>>>>> Please remember to CC this list on all your replies. >>>>>>> You can do this by using Reply-To-List or Reply-All. >>>>>>_______________________________________________ >>>>>>gnucash-user mailing list >>>>>>[email protected] >>>>>>To update your subscription preferences or to unsubscribe: >>>>>>https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>>>>----- >>>>>>Please remember to CC this list on all your replies. >>>>>>You can do this by using Reply-To-List or Reply-All. >_______________________________________________ >gnucash-user mailing list >[email protected] >To update your subscription preferences or to unsubscribe: >https://lists.gnucash.org/mailman/listinfo/gnucash-user >----- >Please remember to CC this list on all your replies. >You can do this by using Reply-To-List or Reply-All. _______________________________________________ gnucash-user mailing list [email protected] To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user ----- Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
