That is excellent news. Good luck with your endeavors ... -----Original Message----- From: Pedro Albuquerque <[email protected]> Sent: Friday, October 09, 2026 12:10 AM To: Kalpesh Patel <[email protected]> Cc: [email protected]; 'Wm Tarr' <[email protected]> Subject: Re[2]: [GNC] Problem with Finance::Quote
Hello Kalpesh, That was indeed my problem, I had no securities/currencies added. Many thanks for your time :) ----- Regards, Pedro Albuquerque Em 08/10/2026 às 20:28, "Kalpesh Patel" <[email protected]> escreveu: >That looks likes both install to be working fine. The difference in >output might be from the differing versions on two systems, or just the order of two if they are same versions on both systems. > >The best test is to create a new empty file in GNUCASH, define a single security -- say AAPL -- and enable it to fetch price for it. After that review the pricing table and see if it registered any pricing info or not. If that works then it is fully working and you might be running into a different problem which might be present in the book. > >If F::Q is tied into GNUCASH properly then Help --> About will display >the version of F::Q as the fourth textual line underneath the Build ID will also display it. > >-----Original Message----- >From: Pedro Albuquerque <[email protected]> >Sent: Thursday, October 08, 2026 10:39 AM >To: Wm Tarr <[email protected]> >Cc: [email protected] >Subject: Re: [GNC] Problem with Finance::Quote > >Wm, thank you for your time, > >Both commands return a list of sources, slightly different, but existing. > >GNUCASH-CLI >Found Finance::Quote version 1.71. >Finance::Quote sources: >alphavantage amfiindia asegr asx australia bats borsa_italiana bourso bseindia bvb canada comdirect consorsbank cse deka europe fetch_live_currencies financeapi finanzpartner finnhub fondsweb fool france ftfunds goldmoney googleweb greece india indiamutual known_currencies marketwatch morningstarjp nasdaq nseindia nyse nzx onvista poland romania sinvestor six stockdata stooq swissfunddata tesouro_direto tmx tradegate tradeville treasurydirect tsp tsx twelvedata ukfunds unionfunds usa usbonds xetra yahoo_json yahoojson yahooweb za > >PERL.EXE >greece >indiamutual >tsp >tradegate >bats >asx >amfiindia >fool >ftfunds >consorsbank >fondsweb >sinvestor >nseindia >asegr >stockdata >tesouro_direto >yahoojson >swissfunddata >india >morningstarjp >marketwatch >fetch_live_currencies >comdirect >bourso >bseindia >canada >poland >usa >finnhub >france >six >nyse >deka >cse >europe >ukfunds >borsa_italiana >tsx >bvb >za >tradeville >twelvedata >finanzpartner >australia >known_currencies >onvista >googleweb >financeapi >xetra >nzx >usbonds >romania >unionfunds >treasurydirect >alphavantage >nasdaq >yahoo_json >stooq >tmx >goldmoney >yahooweb > >----- >Regards, >Pedro Albuquerque >[Join StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) > >Em 08/10/2026 às 15:30, Wm Tarr <[email protected]> escreveu: > >> Try checking F::Q without using GnuCash from PowerShell (Or DOS >> prompt?) >> >> === >> >> C:\Strawberry\perl\bin\perl.exe -MFinance::Quote -le 'print for Finance::Quote->new->sources' >> >> === >> >> it should give a list of quote sources. For checking working with >> GnuCash see >> >> [11.3. Using gnucash-cli for Testing and >> Automation.](https://www.gnucash.org/docs/v5/C/gnucash-manual/fq-comm >> a >> nd-line.html) >> >> Wm >> >> On 2026-10-08 13:30, Pedro Albuquerque wrote: >> >>> I don't know how to fetch prices with F::Q. With GnuCash, I assume >>> it's working because it obviously tries to fetch them. >>> Roughly translated: >>> Failed to fetch prices. Failed to parse the result returned by Finance::Quote. >>> Error message: >>> <unspecified file>(1): expected value >>> Result: >>> >>> ----- >>> Regards, >>> Pedro Albuquerque >>> Join StarLink >>> >>> Em 08/10/2026 às 09:32, "Wm Tarr" >>> [<[email protected]>](mailto:[email protected]) >>> escreveu: >>> >>>> For clarity, is F::Q now working >>>> and can fetch prices but GnuCash won't fetch prices? What does >>>> the english version of the GnuCash error message say? I think you >>>> have the translation files handy :) >>>> >>>> Wm >>>> >>>> On 2026-10-08 07:08, Pedro Albuquerque via gnucash-user wrote: >>>> >>>>> Thank you Kalpesh, that worked. >>>>> Can't imagine why it failed the first >>> >>> time... >>> >>>>> Now I get the same error as in >>>>> Linux, the one on the attached image. New investigation. >>>>> >>>>> Thank you all for your time and help. >>>>> >>>>> ----- >>>>> Regards, >>>>> Pedro Albuquerque >>>>> >>>>> Em 07/10/2026 às 22:46, "Kalpesh Patel" >>>>> [<[email protected]>](mailto:[email protected]) >>>>> escreveu: >>>>> >>>>>> You shouldn't need to install >>>>>> Strawberry Perl separately if you are using >>> >>> the >>> >>>>> 'Install Online Price Retrieval >>>>> for GnuCash' script available on Windows >>> >>> with >>> >>>>> the installation of GnuCash. Just >>>>> type it in the Start menu --> Search >>>>> >>>>>> This is what I would suggest: >>>>>> 1 - Uninstall Strawberry Perl from the Control Panel --> Programs >>>>>> and >>>>> >>>>> Features (if you don’t find it >>>>> then no problem) >>>>> >>>>>> 2 - Delete c:\Straberry >>>>>> directory including the base directory itself. >>>>>> 3 - Reboot the computer >>>>>> 4 - Install GnuCash as usual with a regular user (this goes for >>>>>> all here >>> >>> -- >>> >>>>> run as a regular user and not as >>>>> an admin) >>>>> >>>>>> 5 - Reboot the computer >>>>>> 6 - Run 'Install Online Price Retrieval for GnuCash' as a regular >>>>>> user >>>>>> 7 - Verify the installation (this should return: >>>>> >>>>> C:\Strawberry\perl\bin\perl.exe). >>>>> Open up command prompt and type following >>> >>> at >>> >>>>> the prompt: where perl >>>>> >>>>>> 8 - Verify F::Q installation >>>>>> (this should return: #.##). In the same >>> >>> command >>> >>>>> prompt as step 5. execute >>>>> following: perl -MFinance::Quote -e "print >>>>> $Finance::Quote::VERSION" >>>>> >>>>>> As a side note which is *NOT* >>>>>> necessary for above steps: 'conf init >>>>> >>>>> pushy_https' is a CPAN >>>>> configuration command and needs to be run inside >>> >>> CPAN >>> >>>>> shell by invoking it as follows: >>>>> perl -MCPAN -e shell >>>>> >>>>>> Running CPANM module is a bit >>>>>> simpler like this as it can be directly >>>>> >>>>> executed at the command prompt: >>>>> cpanm install Finance::Quote >>>>> >>>>>> HTH. >>>>>> >>>>>> -----Original Message----- >>>>>> From: Murugan Mariappan >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> Sent: Wednesday, October 07, 2026 6:17 AM >>>>>> To: Pedro Albuquerque >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> Cc: >>>>>> [email protected] >>>>>> Subject: Re: [GNC] Problem with Finance::Quote >>>>>> >>>>>> Hi Pedro, so Strawberry is not installed. Please download >>>>> >>>>> https://strawberryperl.com/ >>>>> and >>>>> install Strawberry first. Then go for >>> >>> install >>> >>>>> price quote >>>>> >>>>>> Saludos Cordiales >>>>>> >>>>>> Murugan >>>>>> >>>>>> ________________________________ >>>>>> From: Pedro Albuquerque >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> Sent: 07 October 2026 11:13 >>>>>> To: Murugan Mariappan >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> Cc: >>>>>> [email protected] >>>>>> >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> Subject: Re[2]: [GNC] Problem with Finance::Quote >>>>>> >>>>>> Hello Murugan, >>>>>> >>>>>> I have 'C:\Strawberry\perl\site\lib\', but it is empty. >>>>> >>>>> 'C:\Strawberry\perl\site\bin\' is >>>>> also empty. >>>>> >>>>>> ----- >>>>>> Regards, >>>>>> Pedro Albuquerque >>>>>> Join StarLink >>>>>> [<https://starlink.com?referral=RC-DF-11719992-38576-14>](https:/ >>>>>> / >>>>>> starlink.com?referral=RC-DF-11719992-38576-14) >>>>>> Em 07/10/2026 às 11:10, Murugan Mariappan >>>>> >>>>> < >>>>> [email protected][<mailto:[email protected]>](ma >>>>> i >>>>> lto:[email protected]) >>>>>> >>>>> escreveu: >>>>> >>>>>> Hi Pedro >>>>>> >>>>>> Can you check C:\Strawberry\perl\site\lib\Finance and confirm >>>>>> Quote folder >>> >>> is >>> >>>>> appearing. After you install >>>>> online price retrieval. If you see the >>> >>> folders, >>> >>>>> then restart GNU Cash and fetch >>>>> the prices >>>>> >>>>>> Saludos Cordiales >>>>>> >>>>>> Murugan >>>>>> >>>>>> ________________________________ >>>>>> From: gnucash-user >>>>> >>>>> [<[email protected]>](ma >>>>> i >>>>> lto:[email protected]) >>>>> on behalf of >>>>> Pedro Albuquerque via gnucash-user >>>>> [<[email protected]>](mailto:[email protected]) >>>>> >>>>>> Sent: 07 October 2026 10:59 >>>>>> To: Wm Tarr >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> Cc: >>>>>> [email protected] >>>>>> >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> Subject: Re: [GNC] Problem with Finance::Quote >>>>>> >>>>>> Thank you for your time, I'll google for some more ideas. >>>>>> >>>>>> ----- >>>>>> Regards, >>>>>> Pedro Albuquerque >>>>>> [Join StarLink]( >>>>>> https://starlink.com?referral=RC-DF-11719992-38576-14 >>>>>> ) >>>>>> >>>>>> Em 07/10/2026 às 10:46, Wm Tarr >>>>>> [<[email protected]>](mailto:[email protected]) >>>>>> escreveu: >>>>>> >>>>>>> I've run it here just to >>>>>>> check and it has worked so I'm out of ideas, >>>>> >>>>> sorry. >>>>> >>>>>>> Wm >>>>>>> >>>>>>> On 2026-10-07 10:08, Pedro Albuquerque wrote: >>>>>>> >>>>>>>> Done, result below: >>>>>>>> >>>>>>>> ----- >>>>>>>> Regards, >>>>>>>> Pedro Albuquerque >>>>>>>> [Join >>>>>>>> StarLink]( >>>>>>>> https://starlink.com?referral=RC-DF-11719992-38576-14 >>>>>>>> ) >>>>>>>> Em 07/10/2026 às 10:00, "Wm Tarr" >>>>>>>> [<[email protected]>](mailto:[email protected]) >>>>>>>> escreveu: >>>>>>>> >>>>>>>>> If you don't use >>>>>>>>> strawberry for anything else try deleting >>>>>>>>> >>>>>>>>> C:\Strawberry >>>>>>>>> >>>>>>>>> and running "Install online price retrieval" again >>>>>>>>> >>>>>>>>> Wm >>>>>>>>> >>>>>>>>> On 2026-10-07 09:48, Pedro Albuquerque via gnucash-user wrote: >>>>>>>>> >>>>>>>>>> Hello, >>>>>>>>>> >>>>>>>>>> I'm trying to install Finance::Quote under Windows 10 Home 22H2. >>>>>>>>>> >>>>>>>>>> Using the included 'Install Online Price Retrieval...' as >>> >>> administrator >>> >>>>> didn't work, so I tried running >>>>> 'perl gnc-fq-update'. also as >>> >>> administrator. I >>> >>>>> got a bunch of errors, output of >>>>> the command is below. I tried running that >>> >>> 'o >>> >>>>> conf...' but it isn't recognized. >>>>> >>>>>>>>>> Can someone please tell >>>>>>>>>> me what am I doing wrong here? Thank you in >>>>> >>>>> advance. >>>>> >>>>>>>>>> [Perl] This is perl 5, >>>>>>>>>> version 38, subversion 2 (v5.38.2) built for >>>>>>>>>> MSWin32-x86-multi-thread-64int >>>>>>>>>> >>>>>>>>>> [gnc-fq-update] >>>>>>>>>> Starting with version 2.29 of the cpan shell, a new download >>>>>>>>>> mechanism is the default which exclusively uses cpan.org as >>>>>>>>>> the host to download from. The configuration variable >>>>>>>>>> pushy_https can be used to (de)select the new mechanism. >>>>>>>>>> Please read more about it and make your choice between the >>>>>>>>>> old and the new mechanism by running >>>>>>>>>> >>>>>>>>>> o conf init pushy_https >>>>>>>>>> >>>>>>>>>> Once you have done that and stored the config variable this >>>>>>>>>> dialog will disappear. >>>>>>>>>> >>>>>>>>>> Starting with version 2.29 of the cpan shell, a new download >>>>>>>>>> mechanism is the default which exclusively uses cpan.org as >>>>>>>>>> the host to download from. The configuration variable >>>>>>>>>> pushy_https can be used to (de)select the new mechanism. >>>>>>>>>> Please read more about it and make your choice between the >>>>>>>>>> old and the new mechanism by running >>>>>>>>>> >>>>>>>>>> o conf init pushy_https >>>>>>>>>> >>>>>>>>>> Once you have done that and stored the config variable this >>>>>>>>>> dialog will disappear. >>>>>>>>>> >>>>>>>>>> Starting with version 2.29 of the cpan shell, a new download >>>>>>>>>> mechanism is the default which exclusively uses cpan.org as >>>>>>>>>> the host to download from. The configuration variable >>>>>>>>>> pushy_https can be used to (de)select the new mechanism. >>>>>>>>>> Please read more about it and make your choice between the >>>>>>>>>> old and the new mechanism by running >>>>>>>>>> >>>>>>>>>> o conf init pushy_https >>>>>>>>>> >>>>>>>>>> Once you have done that and stored the config variable this >>>>>>>>>> dialog will disappear. >>>>>>>>>> >>>>>>>>>> Starting with version 2.29 of the cpan shell, a new download >>>>>>>>>> mechanism is the default which exclusively uses cpan.org as >>>>>>>>>> the host to download from. The configuration variable >>>>>>>>>> pushy_https can be used to (de)select the new mechanism. >>>>>>>>>> Please read more about it and make your choice between the >>>>>>>>>> old and the new mechanism by running >>>>>>>>>> >>>>>>>>>> o conf init pushy_https >>>>>>>>>> >>>>>>>>>> Once you have done that and stored the config variable this >>>>>>>>>> dialog will disappear. >>>>>>>>>> >>>>>>>>>> Starting with version 2.29 of the cpan shell, a new download >>>>>>>>>> mechanism is the default which exclusively uses cpan.org as >>>>>>>>>> the host to download from. The configuration variable >>>>>>>>>> pushy_https can be used to (de)select the new mechanism. >>>>>>>>>> Please read more about it and make your choice between the >>>>>>>>>> old and the new mechanism by running >>>>>>>>>> >>>>>>>>>> o conf init pushy_https >>>>>>>>>> >>>>>>>>>> Once you have done that and stored the config variable this >>>>>>>>>> dialog will disappear. >>>>>>>>>> Database was generated on Wed, 07 Oct 2026 06:07:17 GMT >>>>>>>>>> >>>>>>>>>> Starting with version 2.29 of the cpan shell, a new download >>>>>>>>>> mechanism is the default which exclusively uses cpan.org as >>>>>>>>>> the host to download from. The configuration variable >>>>>>>>>> pushy_https can be used to (de)select the new mechanism. >>>>>>>>>> Please read more about it and make your choice between the >>>>>>>>>> old and the new mechanism by running >>>>>>>>>> >>>>>>>>>> o conf init pushy_https >>>>>>>>>> >>>>>>>>>> Once you have done that and stored the config variable this >>>>>>>>>> dialog will disappear. >>>>>>>>>> Test2 is up to date (1.302225). >>>>>>>>>> Running install for module 'Finance::Quote' >>>>>>>>>> Checksum for >>>>>>>>>> C:\STRAWB~1\cpan\sources\authors\id\B\BP\BPSCHUCK\Finance-Quo >>>>>>>>>> t >>>>>>>>>> e-1.7 1.tar.gz ok Configuring >>>>>>>>>> B/BP/BPSCHUCK/Finance-Quote-1.71.tar.gz with >>>>> >>>>> Makefile.PL Checking if your kit >>>>> is complete... >>>>> >>>>>>>>>> Looks good >>>>>>>>>> Generating a gmake-style Makefile Writing Makefile for >>>>>>>>>> Finance::Quote Writing MYMETA.yml and MYMETA.json >>>>>>>>>> BPSCHUCK/Finance-Quote-1.71.tar.gz >>>>>>>>>> C:\Strawberry\perl\bin\perl.exe Makefile.PL -- OK Running >>>>>>>>>> make for B/BP/BPSCHUCK/Finance-Quote-1.71.tar.gz >>>>>>>>>> ---- Unsatisfied dependencies detected during ---- >>>>>>>>>> ---- BPSCHUCK/Finance-Quote-1.71.tar.gz ---- >>>>>>>>>> Module::CPANTS::Analyse [build_requires] Readonly [requires] >>>>>>>>>> Smart::Comments [requires] String::Util [requires] >>>>>>>>>> Test::Kwalitee [build_requires] Test::Perl::Critic >>>>>>>>>> [build_requires] Web::Scraper [requires] YAML::PP::Perl >>>>>>>>>> [requires] Running install for module 'Module::CPANTS::Analyse' >>>>>>>>>> Checksum for >>>>>>>>>> C:\STRAWB~1\cpan\sources\authors\id\I\IS\ISHIGAKI\Module-CPAN >>>>>>>>>> T S-Ana lyse-1.03.tar.gz ok Configuring >>>>> >>>>> I/IS/ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz with Makefile.PL >>>>> Checking >>> >>> if >>> >>>>> your kit is complete... >>>>> >>>>>>>>>> Looks good >>>>>>>>>> Generating a gmake-style Makefile Writing Makefile for >>>>>>>>>> Module::CPANTS::Analyse Writing MYMETA.yml and MYMETA.json >>>>>>>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>>>>> C:\Strawberry\perl\bin\perl.exe Makefile.PL -- OK Running >>>>>>>>>> make for I/IS/ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Distros.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Distros.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Manifest.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Manifest.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/FindModules.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\FindModules.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Repackageable.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Repackageable.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/CpantsErrors.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\CpantsErrors.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Pod.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Pod.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/NeedsCompiler.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\NeedsCompiler.pm >>>>>>>>>> cp lib/Module/CPANTS/Analyse.pm >>>>>>>>>> blib\lib\Module\CPANTS\Analyse.pm cp >>>>>>>>>> lib/Module/CPANTS/Kwalitee/BrokenInstaller.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\BrokenInstaller.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/MetaYML.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\MetaYML.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Distname.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Distname.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Files.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Files.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/License.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\License.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Prereq.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Prereq.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Version.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Version.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Uses.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Uses.pm >>>>>>>>>> cp lib/Module/CPANTS/Kwalitee/Signature.pm >>>>>>>>>> blib\lib\Module\CPANTS\Kwalitee\Signature.pm >>>>>>>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>>>>> C:\STRAWB~1\c\bin\gmake.exe -- OK Running make test for >>>>>>>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>>>>> "C:\Strawberry\perl\bin\perl.exe" "-MExtUtils::Command::MM" >>>>>>>>>> "-MTest::Harness" "-e" "undef *Test::Harness::Switches; >>>>>>>>>> test_harness(0, 'blib\lib', 'blib\arch')" t/*.t t/*/*.t >>>>>>>>>> t/00_load.t ............... ok t/05_testdir.t ........... ok >>>>>>>>>> t/05_testfile.t ........... ok t/analyse/manifest.t ..... >>>>>>>>>> Dubious, test returned 1 (wstat 256, 0x100) Failed 1/14 >>>>>>>>>> subtests t/analyse/pod.t .......... ok t/analyse/uses.t >>>>>>>>>> ......... ok t/older_test_kwalitee.t .. ok t/x_cpants.t >>>>>>>>>> ............. ok >>>>>>>>>> >>>>>>>>>> Test Summary Report >>>>>>>>>> ------------------- >>>>>>>>>> t/analyse/manifest.t (Wstat: 256 (exited 1) Tests: 14 Failed: >>>>>>>>>> 1) Failed test: 13 Non-zero exit status: 1 Files=8, Tests=54, >>>>>>>>>> 8 wallclock secs ( 0.05 usr + 0.12 sys = 0.17 CPU) >>>>>>>>>> Result: FAIL >>>>>>>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>>>>> C:\STRAWB~1\c\bin\gmake.exe test -- NOT OK //hint// to see >>>>>>>>>> the cpan-testers results for installing this module, try: >>>>>>>>>> reports ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>>>>>>> Stopping: 'install' failed for 'Module::CPANTS::Analyse'. >>>>>>>>>> JSON::Parse is up to date (0.62). >>>>>>>>>> >>>>>>>>>> ----- >>>>>>>>>> Regards, >>>>>>>>>> Pedro Albuquerque >>>>>>>>>> [Join >>>>>>>>>> StarLink]( >>>>>>>>>> https://starlink.com?referral=RC-DF-11719992-38576-14 >>>>>>>>>> ) >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> gnucash-user mailing list >>>>>>>>>> [email protected] >>>>>>>>>> To update your subscription preferences or to unsubscribe: >>>>>>>>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>>>>>>>> ----- >>>>>>>>>> Please remember to CC this list on all your replies. >>>>>>>>>> You can do this by using Reply-To-List or Reply-All. >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> gnucash-user mailing list >>>>>>>>> [email protected] >>>>>>>>> To update your subscription preferences or to unsubscribe: >>>>>>>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>>>>>>> ----- >>>>>>>>> Please remember to CC this list on all your replies. >>>>>>>>> You can do this by using Reply-To-List or Reply-All. >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> gnucash-user mailing list >>>>>>>>> [email protected] >>>>>>>>> To update your subscription preferences or to unsubscribe: >>>>>>>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>>>>>>> ----- >>>>>>>>> Please remember to CC this list on all your replies. >>>>>>>>> You can do this by using Reply-To-List or Reply-All. >>>> >>>> _______________________________________________ >>>> gnucash-user mailing list >>>> [email protected] >>>> To update your subscription preferences or to unsubscribe: >>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>> ----- >>>> Please remember to CC this list on all your replies. >>>> You can do this by using Reply-To-List or Reply-All. _______________________________________________ gnucash-user mailing list [email protected] To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user ----- Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
