Julie , There is no need to be scared. In many cases the suggested commands from the AI will help but they don't always work if your system varies from whatever the AI got its information from. The main thing is to be wary of any commands which ask you to delete files from system areas on your computer (generally anything other than your home directory or where you need sudo permissions to delete stuff). The GTK inspector is not really necessary to get a trace dump for a crash. Flatpak makes it a bit harder than in the straight Linux Mint environment because it isolates the application from the operating system which has some advantages in that your operating system installation is better protected with the disadvantage that accessing information is a bit more convoluted
gdb is the gnu debug tool. It allows you to execute a program one line at a time which is useful in tracking down exactly where in the code a particular problem is occurring. It and the GTK inspector are not really user space tools but are more intended for use by developers. GTK is a library used to construct the display windows and tabs in GnuCash. A stack trace tells developers exactly what code was executing when the operating system or a program being run on it crashes. The procedure is a little different for system crashes and program crashes although a program problem is frequently the source of system crashes. Linux Mint automatically generates crash reports if the system crashes. You can access them from the menu (Menu->Administration->System Information then select the tab Crash Reports. If a crash has occurred there will be information about it-a stack trace. The pastebin button will copy and store that information to a specific location somewhere on the internet and give you a link to that location which you can then copy and paste into emails, bug reports etc. For a crash in a program i.e. usually the program is unresponsive but your computer can still be accessed and other applications are still responsive. The general procedure uses the gdb program but that is less useful for flatpak versions. GnuCash also has some internal debugging which is generated when it is started with a "--debug" switch on the command line and it creates its own execution trace file as it runs. You should be able to access the tracefile created when your GnuCash program was last run using the command "/run/user/1000/.flatpak/org.gnucash.GnuCash/tmp/gnucash.trace" at a terminal. AFAIK that will copy the tracefile to your terminal and you can then copy and paste from the terminal to an email for example. You may need to replace the number 1000 in that command with your user id on your system. You find that by using the command "id -u" at the terminal prompt and if the number it returns is different from 1000 (usually isn't unless your system has multiple users) substitute the returned number for 1000 in the above command. If the original trace file from when it last crashed is missing or has been overwritten by running GnuCash again since and you know the steps which lead to it crashing you can run GnuCash in debug mode with the following command at a terminal flatpak run org.gnucash.GnuCash --debug --log "gnc=info", reproduce the crash and then access the gnucash trace file as above. If a crash can't be reproduced, then it will be very difficult if not near impossible to track the problem downand it is generally better to wait until the problem becomes reproducible. It sometimes takes a bit of time for people on the mailing list to work out what your level of understanding of computers/programming etc is and once they do most of us will try to pitch replies at an appropriate level. On Sat, 2026-10-10 at 16:09 -0700, Julie G wrote: > David et. al., > > this is scary. I am looking at the wiki and it's mostly all a bunch > of gobbledygook to me. I did a control f for "debug" and found 4 > instances. One says: > Crash: Stacktrace > > Flatpak Debugging [1] has instructions for running gdb in a flatpak > round out the gdb instructions in Stack_Trace [2]. An alternative if > you have systemd-coredump installed (it's there by default in Fedora > 28 and later) you can use flathub-coredumpctl [3] to easily generate > a stack trace (in gdb where and bt are synonyms). Gnome's Michael > Catanzaro has a nice explanation [4] of making a good stack trace for > bug reports. > GTK Inspector > > flatpak run --env=GTK_DEBUG=interactive org.gnucash.GnuCash > ...I take this to mean there is a slim chance that i could copy the > immediate above, go to terminal and paste it there, and it would do > something. > > Dang it, when I try, I get the following: > Failed to load module "xapp-gtk3-module" > > i will poke around and keep trying, but i feel lost and scared :-( > > thanks for trying to help! > > julie > > On Thu, Oct 8, 2026 at 9:25 PM David Cousens > <[email protected]> wrote: > > Julie, > > > > The Wiki has some info on running and debugging the flatpak version > > of GnuCash > > https://wiki.gnucash.org/wiki/Flatpak > > > > On Thu, 2026-10-08 at 18:40 -0700, Julie G wrote: > > > and yes, David, that was it. Probably for similar reasons, one > > > transaction was doubly entered, which caused the original > > > discrepancy. Somewherer along the way, something else got > > > wonky. In the absence of a reconciliation report (the bug issue > > > still needs my attention), I manually looked through the > > > transactions and found the errors. > > > > > > Now I am in bug report 799816 and it says... chconnor tried > > > ...like, the command "gnucash --debug --extra logto > > > /tmp/gnucash.trace" > > > what does that do? typing that into terminal didn't work. I > > > don't know how to access flatpak sandbox. > > > i tried typing gnucash.trace into terminal, that didn't work > > > either. I am frightfully ignorant about how to do Stuff. I > > > could look for a $ cat /tmp/gnucash.trace but didn't find it > > > in the file folders.... > > > > > > searched for gnucash.trace in the help, no matching help pages > > > found. > > > > > > HMMM. Please advise if you are so inclined... > > > > > > Thanks! > > > > > > j > > > > > > On Thu, Oct 8, 2026 at 5:27 PM Julie G <[email protected]> > > > wrote: > > > > ohhh, this is possibly really good. I have been wondering > > > > about transactions which fall on the other side of a cutoff > > > > date or something. i am chasing this down; one transaction did > > > > not get included in the .csv file I made that was included in > > > > the statement, but it does not resolve the issue, it simply > > > > alters it. However, last month I DID reconcile successfully. > > > > I also did look for the unreconciled transaction to show up in > > > > either the debit or credit panes to no avail yet. But, it MUST > > > > be something like this. I feel like such a detective. Thank > > > > YOU for the clue/boost! > > > > > > > > Julie > > > > > > > > On Wed, Oct 7, 2026 at 12:54 AM David Cousens > > > > <[email protected]> wrote: > > > > > Julie, > > > > > > > > > > If a starting balance is off after a previous reconciliation > > > > > being > > > > > correct a possible problem is a transaction having been > > > > > entered with a > > > > > date in a previous period. This can occur with incorrect > > > > > entry of a > > > > > year for example. An amount like $1.44 could be something > > > > > like a bank > > > > > fee if there is no other transaction matching the amount. An > > > > > unreconciled transaction in a previous period should show up > > > > > in either > > > > > the debit or credit panes at the top when you open the > > > > > reconciliation > > > > > window. > > > > > > > > > > On Tue, 2026-10-06 at 23:51 -0700, Julie G wrote: > > > > > > Hey all, > > > > > > > > > > > > I am running version 5.17, flathub 5.17 on linux mint. > > > > > > It is perplexing to me that I balance each account every > > > > > month and it > > > > > > all > > > > > > seems great. A month goes by and when I go to do it again, > > > > > it is > > > > > > always my > > > > > > fear that the starting balance will be off. Why ever for > > > > > would this > > > > > > be, if > > > > > > I reconciled to 0.00 the previous month? What a horrible > > > > > question. > > > > > > So > > > > > > let's try a better one... > > > > > > > > > > > > I try to investigate by doing the normal things; see if all > > > > > the > > > > > > transactions were entered... I missed one and added it. > > > > > But I was > > > > > > off $12 > > > > > > and change, and the transaction that didn't make the cut > > > > > (it was on > > > > > > the > > > > > > date cusp and was just missed) was for $11 and change. Now > > > > > I am off > > > > > > $1.44. So I went to reports/reconciliation and the tab it > > > > > brought up > > > > > > was > > > > > > empty. next I looked around in the help and did not find > > > > > anything. > > > > > > Next I > > > > > > started this email and while composing, I tried pulling up > > > > > > reports/reconciliation to accurately recount my steps. The > > > > > tab came > > > > > > up > > > > > > empty again, and the computer froze. I had to alt+sysRq > > > > > "REISUB" to > > > > > > jolt > > > > > > it out of the freeze; I don't know what else to do (which > > > > > is maybe a > > > > > > different question). Meanwhile, I don't know how to figure > > > > > out why > > > > > > I'm > > > > > > $1.44 off because I don't know how to verify that my > > > > > previous > > > > > > reconciliation is all correct. > > > > > > I will add, however, that until this point I had been > > > > > MARVELING how > > > > > > much I > > > > > > LOVE gnucash (and I still do) and how EASY it has been to > > > > > reconcie > > > > > > and how > > > > > > little time it takes me. Wonderful when things just go > > > > > right! but > > > > > > with > > > > > > all good things, they don't always go that well. The good > > > > > news is, > > > > > > they go > > > > > > that well often enough that I'm SO happy I switched to > > > > > Linux and to > > > > > > GNUCASH. I hope it's a glitch and that it can be figured > > > > > out! > > > > > > > > > > > > Thanks in advance; let me know if I am missing some info. > > > > > > > > > > > > Julie > > > > > > ps. Here's my system info: > > > > > > System: > > > > > > Kernel: 7.0.0-38-generic arch: x86_64 bits: 64 compiler: > > > > > gcc v: > > > > > > 13.3.0 > > > > > > clocksource: tsc > > > > > > Desktop: Cinnamon v: 6.4.14 tk: GTK v: 3.24.41 wm: Muffin > > > > > v: 6.4.1 > > > > > > vt: 7 > > > > > > dm: LightDM v: 1.30.0 > > > > > > Distro: Linux Mint 22.2 Zara base: Ubuntu 24.04 noble > > > > > > Machine: > > > > > > Type: Desktop System: Dell product: Inspiron 580 v: N/A > > > > > serial: > > > > > > <superuser required> Chassis: > > > > > > type: 3 serial: <superuser required> > > > > > > Mobo: Dell model: 0C2KJT v: A00 serial: <superuser > > > > > required> uuid: > > > > > > <superuser required> > > > > > > BIOS: Dell v: A07 date: 11/13/2010 > > > > > > CPU: > > > > > > Info: dual core model: Intel Core i3 550 bits: 64 type: > > > > > MT MCP smt: > > > > > > enabled arch: Westmere rev: 5 > > > > > > cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB > > > > > > Speed (MHz): avg: 1197 high: 1199 min/max: 1200/3200 > > > > > cores: 1: 1197 > > > > > > 2: > > > > > > 1198 3: 1199 4: 1197 > > > > > > bogomips: 25537 > > > > > > Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx > > > > > > Graphics: > > > > > > Device-1: NVIDIA GT218 [GeForce 210] vendor: Micro-Star > > > > > MSI driver: > > > > > > nouveau v: kernel arch: Tesla > > > > > > pcie: speed: 2.5 GT/s lanes: 16 ports: active: DVI-I- > > > > > 1,VGA-1 > > > > > > empty: > > > > > > HDMI-A-1 bus-ID: 01:00.0 > > > > > > chip-ID: 10de:0a65 class-ID: 0300 temp: 40.0 C > > > > > > Device-2: Logitech Webcam C260 driver: snd-usb- > > > > > audio,uvcvideo type: > > > > > > USB > > > > > > rev: 2.0 > > > > > > speed: 480 Mb/s lanes: 1 bus-ID: 1-1.1.2:5 chip-ID: > > > > > 046d:081a > > > > > > class-ID: > > > > > > 0102 serial: <filter> > > > > > > Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: > > > > > 23.2.6 > > > > > > driver: X: > > > > > > loaded: modesetting > > > > > > unloaded: fbdev,vesa dri: nouveau gpu: nouveau display- > > > > > ID: :0 > > > > > > screens: 1 > > > > > > Screen-1: 0 s-res: 2720x1024 s-dpi: 96 s-size: 719x270mm > > > > > > (28.31x10.63") > > > > > > s-diag: 768mm (30.24") > > > > > > Monitor-1: DVI-I-1 pos: primary,bottom-r model: ViewSonic > > > > > VX1935wm > > > > > > serial: <filter> > > > > > > res: 1440x900 hz: 60 dpi: 90 size: 408x255mm > > > > > (16.06x10.04") diag: > > > > > > 481mm > > > > > > (18.9") modes: > > > > > > max: 1440x900 min: 720x400 > > > > > > Monitor-2: VGA-1 pos: top-left model: Dell 1908FP serial: > > > > > <filter> > > > > > > res: > > > > > > 1280x1024 hz: 60 > > > > > > dpi: 86 size: 376x301mm (14.8x11.85") diag: 482mm (19") > > > > > modes: > > > > > > max: > > > > > > 1280x1024 min: 720x400 > > > > > > API: EGL v: 1.5 hw: drv: nvidia nouveau platforms: > > > > > device: 0 drv: > > > > > > nouveau > > > > > > device: 1 drv: swrast > > > > > > gbm: drv: nouveau surfaceless: drv: nouveau x11: drv: > > > > > nouveau > > > > > > inactive: > > > > > > wayland > > > > > > API: OpenGL v: 4.5 compat-v: 3.3 vendor: mesa v: 25.2.8- > > > > > > 0ubuntu0.24.04.4 > > > > > > glx-v: 1.4 > > > > > > direct-render: yes renderer: NVA8 device-ID: 10de:0a65 > > > > > > Audio: > > > > > > Device-1: Intel 5 Series/3400 Series High Definition > > > > > Audio vendor: > > > > > > Dell 5 > > > > > > driver: snd_hda_intel > > > > > > v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: > > > > > 0403 > > > > > > Device-2: NVIDIA High Definition Audio vendor: Micro-Star > > > > > MSI > > > > > > driver: > > > > > > snd_hda_intel v: kernel > > > > > > pcie: speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip- > > > > > ID: > > > > > > 10de:0be3 > > > > > > class-ID: 0403 > > > > > > Device-3: Logitech Webcam C260 driver: snd-usb- > > > > > audio,uvcvideo type: > > > > > > USB > > > > > > rev: 2.0 > > > > > > speed: 480 Mb/s lanes: 1 bus-ID: 1-1.1.2:5 chip-ID: > > > > > 046d:081a > > > > > > class-ID: > > > > > > 0102 serial: <filter> > > > > > > API: ALSA v: k7.0.0-38-generic status: kernel-api > > > > > > Server-1: PipeWire v: 1.0.5 status: active with: 1: > > > > > pipewire-pulse > > > > > > status: active > > > > > > 2: wireplumber status: active 3: pipewire-alsa type: > > > > > plugin > > > > > > Network: > > > > > > Device-1: Broadcom NetLink BCM57788 Gigabit Ethernet PCIe > > > > > vendor: > > > > > > Dell > > > > > > driver: tg3 v: kernel > > > > > > pcie: speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: > > > > > 03:00.0 chip-ID: > > > > > > 14e4:1691 class-ID: 0200 > > > > > > IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: > > > > > <filter> > > > > > > Drives: > > > > > > Local Storage: total: 1.37 TiB used: 66.3 GiB (4.7%) > > > > > > ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB > > > > > size: > > > > > > 465.76 GiB > > > > > > speed: 3.0 Gb/s > > > > > > tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT > > > > > > ID-2: /dev/sdb vendor: Samsung model: SSD 870 EVO 1TB > > > > > size: 931.51 > > > > > > GiB > > > > > > speed: 3.0 Gb/s > > > > > > tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT > > > > > > ID-3: /dev/sdg model: Flash Drive SM USB20 size: 7.47 GiB > > > > > type: USB > > > > > > rev: > > > > > > 2.0 spd: 480 Mb/s > > > > > > lanes: 1 tech: SSD serial: <filter> fw-rev: 1100 > > > > > scheme: MBR > > > > > > Partition: > > > > > > ID-1: / size: 456.88 GiB used: 66.28 GiB (14.5%) fs: ext4 > > > > > dev: > > > > > > /dev/sda3 > > > > > > ID-2: /boot/efi size: 512 MiB used: 6.1 MiB (1.2%) fs: > > > > > vfat dev: > > > > > > /dev/sda2 > > > > > > Swap: > > > > > > ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) > > > > > priority: -1 > > > > > > file: > > > > > > /swapfile > > > > > > USB: > > > > > > Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: > > > > > 2.0 speed: > > > > > > 480 > > > > > > Mb/s lanes: 1 > > > > > > chip-ID: 1d6b:0002 class-ID: 0900 > > > > > > Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub > > > > > ports: 6 rev: > > > > > > 2.0 > > > > > > speed: 480 Mb/s > > > > > > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 > > > > > > Hub-3: 1-1.1:3 info: Microchip (formerly SMSC) Hub ports: > > > > > 4 rev: > > > > > > 2.0 > > > > > > speed: 480 Mb/s lanes: 1 > > > > > > power: 2mA chip-ID: 0424:2504 class-ID: 0900 > > > > > > Device-1: 1-1.1.2:5 info: Logitech Webcam C260 type: > > > > > video,audio > > > > > > driver: > > > > > > snd-usb-audio,uvcvideo > > > > > > interfaces: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: > > > > > 500mA > > > > > > chip-ID: > > > > > > 046d:081a class-ID: 0102 > > > > > > serial: <filter> > > > > > > Hub-4: 1-1.3:4 info: Terminus Hub ports: 4 rev: 2.0 > > > > > speed: 480 Mb/s > > > > > > lanes: 1 power: 100mA > > > > > > chip-ID: 1a40:0101 class-ID: 0900 > > > > > > Device-1: 1-1.3.1:6 info: Dell QuietKey Keyboard type: > > > > > keyboard > > > > > > driver: > > > > > > hid-generic,usbhid > > > > > > interfaces: 1 rev: 1.1 speed: 1.5 Mb/s lanes: 1 power: > > > > > 70mA chip- > > > > > > ID: > > > > > > 413c:2106 class-ID: 0301 > > > > > > Device-2: 1-1.3.2:7 info: Silicon Motion - Taiwan > > > > > (formerly Feiya ) > > > > > > Flash > > > > > > Drive > > > > > > type: mass storage driver: usb-storage interfaces: 1 > > > > > rev: 2.0 > > > > > > speed: > > > > > > 480 Mb/s lanes: 1 > > > > > > power: 100mA chip-ID: 090c:1000 class-ID: 0806 serial: > > > > > <filter> > > > > > > Device-3: 1-1.3.3:8 info: Primax HP Optical Mouse type: > > > > > mouse > > > > > > driver: > > > > > > hid-generic,usbhid > > > > > > interfaces: 1 rev: 2.0 speed: 1.5 Mb/s lanes: 1 power: > > > > > 98mA chip- > > > > > > ID: > > > > > > 0461:4d0f class-ID: 0301 > > > > > > Device-4: 1-1.3.4:9 info: HP HP LaserJet CP1025nw type: > > > > > printer > > > > > > driver: > > > > > > usblp interfaces: 2 > > > > > > rev: 2.0 speed: 480 Mb/s lanes: 1 power: 98mA chip-ID: > > > > > 03f0:0b2a > > > > > > class-ID: 0701 serial: <filter> > > > > > > Hub-5: 2-0:1 info: full speed or root hub ports: 2 rev: > > > > > 1.1 speed: > > > > > > 12 > > > > > > Mb/s lanes: 1 > > > > > > chip-ID: 1d6b:0001 class-ID: 0900 > > > > > > Hub-6: 3-0:1 info: full speed or root hub ports: 2 rev: > > > > > 2.0 speed: > > > > > > 480 > > > > > > Mb/s lanes: 1 > > > > > > chip-ID: 1d6b:0002 class-ID: 0900 > > > > > > Hub-7: 3-1:2 info: Intel Integrated Rate Matching Hub > > > > > ports: 8 rev: > > > > > > 2.0 > > > > > > speed: 480 Mb/s > > > > > > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 > > > > > > Device-1: 3-1.2:3 info: Fitipower Integrated Mass Storage > > > > > Device > > > > > > type: > > > > > > mass storage > > > > > > driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 > > > > > Mb/s lanes: > > > > > > 1 > > > > > > power: 250mA > > > > > > chip-ID: 18e3:9106 class-ID: 0806 serial: <filter> > > > > > > Device-2: 3-1.4:4 info: Canon CanoScan LiDE 210 type: > > > > > <vendor > > > > > > specific> > > > > > > driver: N/A > > > > > > interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 power: > > > > > 500mA > > > > > > chip-ID: > > > > > > 04a9:190a class-ID: ff00 > > > > > > Hub-8: 4-0:1 info: full speed or root hub ports: 4 rev: > > > > > 2.0 speed: > > > > > > 480 > > > > > > Mb/s lanes: 1 > > > > > > chip-ID: 1d6b:0002 class-ID: 0900 > > > > > > Hub-9: 5-0:1 info: full speed or root hub ports: 2 rev: > > > > > 1.1 speed: > > > > > > 12 > > > > > > Mb/s lanes: 1 > > > > > > chip-ID: 1d6b:0001 class-ID: 0900 > > > > > > Sensors: > > > > > > System Temperatures: cpu: 45.0 C mobo: N/A gpu: nouveau > > > > > temp: 40.0 > > > > > > C > > > > > > Fan Speeds (rpm): cpu: 921 fan-2: 800 > > > > > > Repos: > > > > > > Packages: 2609 pm: dpkg pkgs: 2597 pm: flatpak pkgs: 12 > > > > > > No active apt repos in: /etc/apt/sources.list > > > > > > Active apt repos in: /etc/apt/sources.list.d/element- > > > > > io.list > > > > > > 1: deb [signed-by=/usr/share/keyrings/element-io- > > > > > archive- > > > > > > keyring.gpg] > > > > > > https: //packages.element.io/debian/ default main > > > > > > Active apt repos in: > > > > > > /etc/apt/sources.list.d/official-package-repositories.list > > > > > > 1: deb http: //packages.linuxmint.com zara main > > > > > upstream import > > > > > > backport > > > > > > 2: deb http: //archive.ubuntu.com/ubuntu noble main > > > > > restricted > > > > > > universe > > > > > > multiverse > > > > > > 3: deb http: //archive.ubuntu.com/ubuntu noble-updates > > > > > main > > > > > > restricted > > > > > > universe multiverse > > > > > > 4: deb http: //archive.ubuntu.com/ubuntu noble- > > > > > backports main > > > > > > restricted universe multiverse > > > > > > 5: deb http: //security.ubuntu.com/ubuntu/ noble- > > > > > security main > > > > > > restricted universe multiverse > > > > > > Active apt repos in: /etc/apt/sources.list.d/google- > > > > > chrome.sources > > > > > > 1: deb [arch=amd64] https: > > > > > //dl.google.com/linux/chrome- > > > > > > stable/deb/ > > > > > > stable main > > > > > > Active apt repos in: > > > > > /etc/apt/sources.list.d/vivaldi.sources > > > > > > 1: deb [arch=amd64] https: > > > > > //repo.vivaldi.com/stable/deb/ stable > > > > > > main > > > > > > Info: > > > > > > Memory: total: 12 GiB note: est. available: 9.57 GiB > > > > > used: 5.89 GiB > > > > > > (61.5%) > > > > > > Processes: 303 Power: uptime: 8m states: freeze,mem,disk > > > > > suspend: > > > > > > deep > > > > > > wakeups: 0 > > > > > > hibernate: platform Init: systemd v: 255 target: > > > > > graphical (5) > > > > > > default: > > > > > > graphical > > > > > > Compilers: gcc: 13.3.0 Client: Cinnamon v: 6.4.14 inxi: > > > > > 3.3.34 > > > > > > _______________________________________________ > > > > > > gnucash-user mailing list > > > > > > [email protected] > > > > > > To update your subscription preferences or to unsubscribe: > > > > > > https://lists.gnucash.org/mailman/listinfo/gnucash-user > > > > > > ----- > > > > > > Please remember to CC this list on all your replies. > > > > > > You can do this by using Reply-To-List or Reply-All. > > > > > > > > > -- David Cousens [1] Flatpak Debugging https://docs.flatpak.org/en/latest/debugging.html [2] Stack_Trace https://wiki.gnucash.org/wiki/Stack_Trace [3] flathub-coredumpctl https://www.figuiere.net/technotes/notes/tn001/ [4] nice explanation https://blogs.gnome.org/mcatanzaro/2021/09/18/creating-quality-backtraces-for-crash-reports/ _______________________________________________ gnucash-user mailing list [email protected] To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user ----- Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
