Hi Tim,

did you try c0d0p1 ?

The "Other OS" is probably the partition with the FAT32 fs.

 From the scheme on the link you gave it would be c0d0p0:a, you can look 
in /dev/dsk/c0d0* to see what's available. There is little harm in 
"trying" to mount partitions like:

mount -F pcfs /dev/dsk/c0d0p1 /mnt

If it doesn't contain a FAT32 fs it won't work.

Let me know if hit helps.

Thanks,
-Tim

Tim Dobson wrote:
> Tim:
>
> OK
>
> [EMAIL PROTECTED]:~$ sudo fdisk c0d0s0 -R (readonly)
>
>             Total disk size is 9964 cylinders
>              Cylinder size is 16065 (512 byte) blocks
>
>                                                Cylinders
>       Partition   Status    Type          Start   End   Length    %
>       =========   ======    ============  =====   ===   ======   ===
>           1       Active    Other OS       2433  7531    5099     51
>           2                 Linux native   7532  9841    2310     23
>           3                 Solaris2          1  2392    2392     24
>
> [EMAIL PROTECTED]:~$ mount | grep -w ^/
> / on /dev/dsk/c0d0s0
> read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1980000
> on Sun Dec  2 23:33:42 2007
>
> [EMAIL PROTECTED]:~$ df
> /                  (/dev/dsk/c0d0s0   ):12224460 blocks   909387 files
> /devices           (/devices          ):       0 blocks        0 files
> /dev               (/dev              ):       0 blocks        0 files
> /system/contract   (ctfs              ):       0 blocks 2147483615 files
> /proc              (proc              ):       0 blocks     7981 files
> /etc/mnttab        (mnttab            ):       0 blocks        0 files
> /etc/svc/volatile  (swap              ): 2411824 blocks   150303 files
> /system/object     (objfs             ):       0 blocks 2147483496 files
> /lib/libc.so.1     (/usr/lib/libc/libc_hwcap1.so.1):12224460 blocks
> 909387 files
> /dev/fd            (fd                ):       0 blocks        0 files
> /tmp               (swap              ): 2411824 blocks   150303 files
> /var/run           (swap              ): 2411824 blocks   150303 files
> /export/home       (home              ):19608759 blocks 19608759 files
>
> [EMAIL PROTECTED]:~$ zpool status
>   pool: home
>  state: ONLINE
>  scrub: none requested
> config:
>
>         NAME        STATE     READ WRITE CKSUM
>         home        ONLINE       0     0     0
>           c0d0s1    ONLINE       0     0     0
>
> errors: No known data errors
> [EMAIL PROTECTED]:~$
>
>
> Would I be right in thinking here, that my fat32 partition; the 40 GB
> one (50%) seems not to be being recognized?
>
> It would not be suprising knowing that partition and it's record, it
> would also make sese with whats up there^^ and what I have been seeing
> - "no tdos partition" etc.
>
> Thanks for replying Tim, I really appreciate it. It may not have
> solved the problem, but at least I am fairly certain what the problem
> is and what I can do about it.
>
> Again, many thanks,
>
> Tim
>
>
> On 02/12/2007, Tim Spriggs <[EMAIL PROTECTED]> wrote:
>   
>> Hello Tim,
>>
>>     
>
>   
>> This will give you the list of partitions and hopefully tell you which
>> partition is FAT32.
>>
>> You can figure out which disk it is since it is the same disk used by
>> Nexenta. If you are using UFS root then simply:
>>
>> # mount | grep -w ^/
>>
>> For ZFS root do:
>>
>> # zpool status
>>
>> Don't forget to replace "s?" (probably s0) with p0 for fdisk.
>>
>> Good luck,
>> -Tim
>>
>> Tim Dobson wrote:
>>     
>>> Hi perhaps you can help me.
>>> I would be very grateful if someone could!
>>>
>>> I have a fat32 partition which i keep various day-to-day bits and
>>> bobs, dating back from the old days.
>>> I want to mount it. It does not sound very difficult;
>>> I have IDE HDs
>>> My Nexenta & the Fat32 partition are on the same drive, which happens
>>> to be the master.
>>>
>>> I have been trying to follow various sets of instructions, which  are
>>> readily availabe on the web via google.
>>>
>>> for the purposes here, I will try demonstrate with the instructions
>>> from here: 
>>> http://forum.java.sun.com/thread.jspa?threadID=5113158&messageID=9385288
>>>
>>> The problem I get unstuck at is that I don't know what the /dev/dsk/
>>> id of my partition is.
>>> I also don't understand what the "Y" does in cXdXpX:Y
>>>
>>> #####
>>>
>>> I wonder if there is a command which will list the partitions on ones
>>> disk with the file systems and /dev/dsk/ ids.
>>>
>>> #####
>>>
>>> I have asked on irc but there was no immediate response.
>>>
>>> I would be very grateful of a response.
>>>
>>> Cheers
>>>
>>> Tim
>>>
>>>
>>>       
>>     
>
>
>   

_______________________________________________
gnusol-users mailing list
[email protected]
http://lists.sonic.net/mailman/listinfo/gnusol-users

Reply via email to