Hello Hisham, Hisham Muhammad wrote: > On 9/22/07, rubisher <[EMAIL PROTECTED]> wrote: >> Hisham Muhammad wrote: >>> On 9/14/07, rubisher <[EMAIL PROTECTED]> wrote: >>>> Hello Hisham, >>>> >>>> This recipe seems to be better to me but I still need some help: >>>> >>>> even thought I ask to use all new config files when I "Compile >>>> Udev--115--recipe.tar.bz2" , >>>> - I still have messages udevd complaining of "console group" >>>> (unfortunatley I don't know how to start my box from a serial >>>> port to grab accurate messages) >>>> - I couldn't setup my eth0 or eth1 (iirc devices not found?) >>>> - finaly init boot scripts hung on "Set console font" (need Ctrl-Alt-Del >>>> ;-( ) >>>> >>>> Sorry no clue on udev to help more (simply because my linux boxes are a >>>> bit too old to need or to be able to play with udev) >>> Some of those errors are odd, but may be related to the mounting >>> problems I just wrote about in another post of this thread, where I >>> also posted an updated version to the Udev recipe and some related >>> instructions. >>> >> Ok I read your other related reply ;-) >> >>> Any lingering references to the 'console' group may be caused by other >>> packages that also install Udev rules. After upgrading, if you still >>> get references to 'console', please try running >>> >>> grep 'GROUP="console"' /System/Settings/udev/rules.d/* >>> >> [EMAIL PROTECTED] /System/Settings] grep 'GROUP="console"' >> /System/Settings/udev/rules.d/* >> /System/Settings/udev/rules.d/60-libpisock.rules:ATTRS{idVendor}=="054c", >> ATTRS{idProduct}=="0038", GROUP="console", MODE="0664" [snip] >> /System/Settings/udev/rules.d/60-libpisock.rules:ATTRS{idVendor}=="12ef", >> ATTRS{idProduct}=="0100", GROUP="console", MODE="0664" >> /System/Settings/udev/rules.d/60-libpisock.rules:ATTRS{idVendor}=="4766", >> ATTRS{idProduct}=="0001", GROUP="console", MODE="0664" > > Ok, these are from the Pilot-Link package. I just uploaded a new > recipe, so if you 'Compile pilot-link 0.12.2-r2' this should go away > (this new revision should show up in the repo later today). > Ok I will wait a bit (don't worry I can be patient ;-) )
>>> so we can find out who is it that's looking for it. >>> >>> All feedback for helping to test this recipe is welcome, >>> >> I will try to find more details on howto grab the boot scripts output from >> serial port (it too quick for me to read all, sorry) > Sorry I didn't have time to look for more details on a method to grab stuff from a serial port :_( > For reference, are you still having these problems? -> > >> - I couldn't setup my eth0 or eth1 (iirc devices not found?) >> - finaly init boot scripts hung on "Set console font" (need Ctrl-Alt-Del ;-( >> ) > Appology, (it was in my mind to give those details and I forget) but unfortunately yes (the 2 pb) I don't know if it's important but I running a kernel 2.6.22.1 (build with 'official' gobolinux recipe, I mean the one I found in <http://gobolinux.org/recipe-store/> and not yet a customized of mine in which I could lake this or those detail ;<) > -- Hisham Tx again for your support, r. _______________________________________________ gobolinux-devel mailing list gobolinux-devel@lists.gobolinux.org http://lists.gobolinux.org/mailman/listinfo/gobolinux-devel