On our recent ESS systems we do not see /etc/tuned/scale/tuned.conf (or script.sh) owned by any package (rpm -qif …). I’ve attached what we have on our ESS 5.3.3 systems.
Best, Chris From: <[email protected]> on behalf of "Wahl, Edward" <[email protected]> Reply-To: gpfsug main discussion list <[email protected]> Date: Monday, September 16, 2019 at 10:50 AM To: gpfsug main discussion list <[email protected]> Subject: Re: [gpfsug-discuss] Ganesha all IPv6 sockets - ist this to be expected? What package provides this /usr/lib/tuned/ file? Ed ________________________________ From: [email protected] <[email protected]> on behalf of Olaf Weiser <[email protected]> Sent: Monday, September 16, 2019 3:12 AM To: gpfsug main discussion list <[email protected]> Subject: Re: [gpfsug-discuss] Ganesha all IPv6 sockets - ist this to be expected? Hallo Heiner, usually, Spectrum Scale comes with a tuned profile (named scale) .. [root@nsd01 ~]# tuned-adm active Current active profile: scale in there [root@nsd01 ~]# cat /etc/tuned/scale/tuned.conf | tail -3 # Disable IPv6 net.ipv6.conf.all.disable_ipv6=1 net.ipv6.conf.default.disable_ipv6=1 [root@nsd01 ~]# depending on .... what you need to achieve .. one might be forced to changed that.. e.g. for RoCE .. you need IPv6 to be active ... but for all other scenarios with SpectrumScale (at least what I'm aware of right now) ... IPv6 can be disabled... From: "Billich Heinrich Rainer (ID SD)" <[email protected]> To: gpfsug main discussion list <[email protected]> Date: 09/13/2019 05:02 PM Subject: [EXTERNAL] [gpfsug-discuss] Ganesha all IPv6 sockets - ist this to be expected? Sent by: [email protected] ________________________________ Hello, I just noted that our ganesha daemons offer IPv6 sockets only, IPv4 traffic gets encapsulated. But all traffic to samba is IPv4, smbd offers both IPv4 and IPv6 sockets. I just wonder whether this is to be expected? Protocols support IPv4 only, so why running on IPv6 sockets only for ganesha? Did we configure something wrong and should completely disable IPv6 on the kernel level Any comment is welcome Cheers, Heiner -- ======================= Heinrich Billich ETH Zürich Informatikdienste Tel.: +41 44 632 72 56 [email protected] ======================== I did check with ss -l -t -4 ss -l -t -6 add -p to get the process name, too. do you get the same results on your ces nodes? [root@nas22ces04-i config_samples]# ss -l -t -4 State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 8192 *:gpfs *:* LISTEN 0 50 *:netbios-ssn *:* LISTEN 0 128 *:5355 *:* LISTEN 0 128 *:sunrpc *:* LISTEN 0 128 *:ssh *:* LISTEN 0 100 127.0.0.1:smtp *:* LISTEN 0 10 10.250.135.24:4379 *:* LISTEN 0 128 *:32765 *:* LISTEN 0 50 *:microsoft-ds *:* [root@nas22ces04-i config_samples]# ss -l -t -6 State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 128 :::32767 :::* LISTEN 0 128 :::32768 :::* LISTEN 0 128 :::32769 :::* LISTEN 0 128 :::2049 :::* LISTEN 0 128 :::5355 :::* LISTEN 0 50 :::netbios-ssn :::* LISTEN 0 128 :::sunrpc :::* LISTEN 0 128 :::ssh :::* LISTEN 0 128 :::32765 :::* LISTEN 0 50 :::microsoft-ds :::* _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss<https://urldefense.proofpoint.com/v2/url?u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss&d=DwMFAw&c=C9X8xNkG_lwP_-eFHTGejw&r=DopWM-bvfskhBn2zeglfyyw5U2pumni6m_QzQFYFepU&m=vVQfi9vKAMyJJJkblLG-6lFn75kWWfpc6yGZpiIkJMo&s=l9Yuaa-imE1XkV2RV-lyYdcH0aRV2klb5vXbPDHg6F4&e=> ________________________________ This message is for the recipient’s use only, and may contain confidential, privileged or protected information. Any unauthorized use or dissemination of this communication is prohibited. If you received this message in error, please immediately notify the sender and destroy all copies of this message. The recipient should check this email and any attachments for the presence of viruses, as we accept no liability for any damage caused by any virus transmitted by this email.
tuned.conf
Description: tuned.conf
script.sh
Description: script.sh
_______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss
