Hi Kuei-Yu (et al.) Happy New Year!
I’d like to reiterate my follow-up question to your comments – in particular to the line copied below, which mentions a behavior that I’m seeking for this command, but cannot reproduce (in vers, 5.0.3@Linux), namely (with my highlights): # mmedquota -d -u pfs004 fs9:fset7 <=== run mmedquota -d -u to get default limits The reduction of scope to a named filesystem/fileset is what I’m seeking, *but* at least the 5.0.3 version seems to reject that parameter with an error, and apply the user’s default restoration to *all filesystems and filesets* Are you using a different version? Or a different implementations? I’m running SS 5.0.3 on Linux x64. I apologize for having to press this point, but this matter is of a certain importance to us and it appears that the public documentation is mum in this regard. Furthermore, the IBM support, at the first pass, was quite confused and unfocused. (I’m trying with a new case now, but my hopes are low). You seem to be an IBM insider, so …. I count on your help 😊. Sorry, for the insistence. 😊 Best, Razvan Popescu Columbia Univ. -- From: <[email protected]> on behalf of Kuei-Yu Wang-Knop <[email protected]> Reply-To: gpfsug main discussion list <[email protected]> Date: Thursday, December 19, 2019 at 3:56 PM To: gpfsug main discussion list <[email protected]> Subject: Re: [gpfsug-discuss] Quota: revert user quota to FILESET default Razvan, mmedquota -d -u fs:fset: -d Reestablish default quota limits for a specific user, group, or fileset that had an explicit quota limit set by a previous invocation of the mmedquota command. This option will assign the default quota to the user. The quota entry type will change from "e" to "d_fset". You may need to play a little bit with your system to get the result as you can have default quota per file system set and default quota per fileset enabled. An exemple to illustrate User pfs004 in filesystem fs9 and fileset fset7 has explicit quota set: # mmrepquota -u -v fs9 | grep pfs004 pfs004 fset7 USR 1088 102400 1048576 0 none | 13 10000 33333 0 none e <=== explicit # mmlsquota -d fs9:fset7 Default Block Limits(KB) | Default File Limits Filesystem Fileset type quota limit | quota limit entryType fs9 fset7 USR 102400 1048576 | 10000 0 default on <=== default quota limits for fs9:fset7, the default fs9 fset7 GRP 0 0 | 0 0 i # mmlsquota -u pfs004 fs9:fset7 Block Limits | File Limits Filesystem Fileset type KB quota limit in_doubt grace | files quota limit in_doubt grace Remarks fs9 fset7 USR 1088 102400 1048576 0 none | 13 10000 33333 0 none <=== explicit # mmedquota -d -u pfs004 fs9:fset7 <=== run mmedquota -d -u to get default limits # mmlsquota -u pfs004 fs9:fset7 Block Limits | File Limits Filesystem Fileset type KB quota limit in_doubt grace | files quota limit in_doubt grace Remarks fs9 fset7 USR 1088 102400 1048576 0 none | 13 10000 0 0 none <=== takes the default value # mmrepquota -u -v fs9:fset7 | grep pfs004 pfs004 fset7 USR 1088 102400 1048576 0 none | 13 10000 0 0 none d_fset <=== now user pfs004 in fset7 takes the default limits # ------------------------------------ Kuei-Yu Wang-Knop IBM Scalable I/O development (845) 433-9333 T/L 293-9333, E-mail: [email protected] [Inactive hide details for "Popescu, Razvan" ---12/19/2019 02:28:51 PM---I see. May I ask one follow-up question, please: what]"Popescu, Razvan" ---12/19/2019 02:28:51 PM---I see. May I ask one follow-up question, please: what is “mmedquota -d -u <username>” supposed From: "Popescu, Razvan" <[email protected]> To: gpfsug main discussion list <[email protected]> Date: 12/19/2019 02:28 PM Subject: [EXTERNAL] Re: [gpfsug-discuss] Quota: revert user quota to FILESET default Sent by: [email protected] ________________________________ I see. May I ask one follow-up question, please: what is “mmedquota -d -u <username>” supposed to do in this case? Really appreciate your assistance. Razvan -- From: <[email protected]> on behalf of Kuei-Yu Wang-Knop <[email protected]> Reply-To: gpfsug main discussion list <[email protected]> Date: Thursday, December 19, 2019 at 2:25 PM To: gpfsug main discussion list <[email protected]> Subject: Re: [gpfsug-discuss] Quota: revert user quota to FILESET default >> To make it more technical …. This fellow’s quota entryType is now “e” . I >> want to change it back to entryType “I”. (I hope I’m not talking nonsense >> here) Currently there is no function to revert an explicit quota entry (e) to initial (i) entry. Kuei ------------------------------------ Kuei-Yu Wang-Knop IBM Scalable I/O development (845) 433-9333 T/L 293-9333, E-mail: [email protected] [Inactive hide details for "Popescu, Razvan" ---12/19/2019 02:18:54 PM---Thanks for your kind reply. My problem is different tho]"Popescu, Razvan" ---12/19/2019 02:18:54 PM---Thanks for your kind reply. My problem is different though. From: "Popescu, Razvan" <[email protected]> To: gpfsug main discussion list <[email protected]> Date: 12/19/2019 02:18 PM Subject: [EXTERNAL] Re: [gpfsug-discuss] Quota: revert user quota to FILESET default Sent by: [email protected] ________________________________ Thanks for your kind reply. My problem is different though. I have set a fileset default quota (doing all the steps you recommended) and all was Ok. During operations I have edited *individual* quotas, for example to increase certain user’s allocations. Now, I want to *revert* (change back) one of these users to the (fileset) default quota ! For example, I have used one user account to test the mmedquota command setting his limits to a certain value (just testing). I’d like now to make that user’s quota be the default fileset quota, and not just numerically, but have his quota record follow the changes in fileset default quota limits. To make it more technical …. This fellow’s quota entryType is now “e” . I want to change it back to entryType “I”. (I hope I’m not talking nonsense here) mmedquota’s “-d” option is supposed to reinstate the defaults, but it doesn’t seem to work for fileset based quotas … !?! Razvan -- From: <[email protected]> on behalf of Kuei-Yu Wang-Knop <[email protected]> Reply-To: gpfsug main discussion list <[email protected]> Date: Thursday, December 19, 2019 at 2:06 PM To: gpfsug main discussion list <[email protected]> Subject: Re: [gpfsug-discuss] Quota: revert user quota to FILESET default It sounds like you would like to have default perfileset quota enabled. Have you tried to enable the default quota on the filesets and then set the default quota limits for those filesets? For example, in a filesystem fs9 and fileset fset9. File system fs9 has default quota on and --perfileset-quota enabled. # mmlsfs fs9 -Q --perfileset-quota flag value description ------------------- ------------------------ ----------------------------------- -Q user;group;fileset Quotas accounting enabled user;fileset Quotas enforced user;group;fileset Default quotas enabled --perfileset-quota Yes Per-fileset quota enforcement # Enable default user quota for fileset fset9, if not enabled yet, e.g. "mmdefquotaon -u fs9:fset9" Then set the default quota for this fileset using mmdefedquota" # mmdefedquota -u fs9:fset9 .. *** Edit quota limits for USR DEFAULT entry for fileset fset9 NOTE: block limits will be rounded up to the next multiple of the block size. block units may be: K, M, G, T or P, inode units may be: K, M or G. fs9: blocks in use: 0K, limits (soft = 102400K, hard = 1048576K) inodes in use: 0, limits (soft = 10000, hard = 22222) ... Hope that this helps. ------------------------------------ Kuei-Yu Wang-Knop IBM Scalable I/O development (845) 433-9333 T/L 293-9333, E-mail: [email protected] [Inactive hide details for "Popescu, Razvan" ---12/19/2019 12:22:34 PM---Hi, I’d like to revert a user’s quota to the fileset]"Popescu, Razvan" ---12/19/2019 12:22:34 PM---Hi, I’d like to revert a user’s quota to the fileset’s default, but “mmedquota -d -u <username>” From: "Popescu, Razvan" <[email protected]> To: "[email protected]" <[email protected]> Date: 12/19/2019 12:22 PM Subject: [EXTERNAL] [gpfsug-discuss] Quota: revert user quota to FILESET default Sent by: [email protected] ________________________________ Hi, I’d like to revert a user’s quota to the fileset’s default, but “mmedquota -d -u <username>” fails because I do have not set a filesystem default…. [root@xxx]# mmedquota -d -u user gsb USR default quota is off (SpectrumScale 5.0.3 Standard Ed. on RHEL7 x86) Is this a limitation of the current mmedquota implementation, or of something more profound?... I have several filesets within this filesystem, each with various quota structures. A filesystem-wide default quota didn’t seem useful so I never defined one; however I do have multiple fileset-level default quotas, and this is the level at which I’d like to be able to handle this matter… Have I hit a limitation of the implementation? Any workaround, if that’s the case? Many thanks, Razvan Popescu Columbia Business School _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss
_______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss
