Further, the error that comes back after the debug script is ran is : *** Error (-52: 'Could not find the requested device on the USB port') ***
On Fri, May 8, 2020 at 11:47 PM Jesse Pittman <soc...@layerlair.com> wrote: > Hello, > > Just following the instructions on the list of supported camera > <http://www.gphoto.org/proj/libgphoto2/support.php>. It appears the Canon > 90d is not supported by default, I went through the steps outlined and > this was the output. > [image: image.png] > > Or in text, > > pi@octopi:~ $ gphoto2 --auto-detect > Model Port > ---------------------------------------------------------- > USB PTP Class Camera usb:001,010 > pi@octopi:~ $ lang=c gphoto2 --summary >summary.txt > pi@octopi:~ $ lang=c gphoto2 --list-all-config >config.txt > pi@octopi:~ $ gphoto2 --capture-image > > *** Error *** > Canon EOS Full-Press failed (0x2019: PTP Device Busy) > ERROR: Could not capture image. > ERROR: Could not capture. > *** Error (-110: 'I/O in progress') *** > > For debugging messages, please use the --debug option. > Debugging messages may help finding a solution to your problem. > If you intend to send any error or debug messages to the gphoto > developer mailing list <gphoto-devel@lists.sourceforge.net>, please run > gphoto2 as follows: > > env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt > --capture-image > > Please make sure there is sufficient quoting around the arguments. > > pi@octopi:~ $ gphoto2 --capture-image > > Are there any plans or work arounds for this camera in the near future? It > would be amazing for this device to be supported. > > Thank you, > > Jesse Pittman >
_______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
