Hi, There camera shows errors, but I would need an debug logfile to see what is wrong.
It is already detected as a Canon EOS. Ciao, Marcus On Fri, May 08, 2020 at 11:50:19PM -0700, Jesse Pittman wrote: > I apologize, that is incorrect. The erro that comes back after debug is : > > *** Error *** > Canon EOS Full-Press failed (0x2019: PTP Device Busy) > ERROR: Could not capture image. > ERROR: Could not capture. > *** Error (-110: 'I/O in progress') *** > > On Fri, May 8, 2020 at 11:49 PM Jesse Pittman <soc...@layerlair.com> wrote: > > > Further, the error that comes back after the debug script is ran is : *** > > Error (-52: 'Could not find the requested device on the USB port') *** > > > > On Fri, May 8, 2020 at 11:47 PM Jesse Pittman <soc...@layerlair.com> > > wrote: > > > >> Hello, > >> > >> Just following the instructions on the list of supported camera > >> <http://www.gphoto.org/proj/libgphoto2/support.php>. It appears the > >> Canon 90d is not supported by default, I went through the steps outlined > >> and this was the output. > >> [image: image.png] > >> > >> Or in text, > >> > >> pi@octopi:~ $ gphoto2 --auto-detect > >> Model Port > >> ---------------------------------------------------------- > >> USB PTP Class Camera usb:001,010 > >> pi@octopi:~ $ lang=c gphoto2 --summary >summary.txt > >> pi@octopi:~ $ lang=c gphoto2 --list-all-config >config.txt > >> pi@octopi:~ $ gphoto2 --capture-image > >> > >> *** Error *** > >> Canon EOS Full-Press failed (0x2019: PTP Device Busy) > >> ERROR: Could not capture image. > >> ERROR: Could not capture. > >> *** Error (-110: 'I/O in progress') *** > >> > >> For debugging messages, please use the --debug option. > >> Debugging messages may help finding a solution to your problem. > >> If you intend to send any error or debug messages to the gphoto > >> developer mailing list <gphoto-devel@lists.sourceforge.net>, please run > >> gphoto2 as follows: > >> > >> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt > >> --capture-image > >> > >> Please make sure there is sufficient quoting around the arguments. > >> > >> pi@octopi:~ $ gphoto2 --capture-image > >> > >> Are there any plans or work arounds for this camera in the near future? > >> It would be amazing for this device to be supported. > >> > >> Thank you, > >> > >> Jesse Pittman > >> > > _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
