Hi, thanks for the report!
I added code to the current libgphoto2 master branch to enable OM-1 for capture. Judging from the debug it will probably work, but would like to have feedback if it does :) Ciao, Marcus On Mon, Jul 24, 2023 at 04:17:12PM +0000, bill.visick via Gphoto-devel wrote: > Hi, > > I’m trying to use an OM System OM-1 camera with libgphoto2 (actually so I can > use it tethered from darktable) and it is not supported. I think this is > because it’s too new: the earlier Olympus OMD EM1 mark 3 is supported. The > results of the commands listed on your support page follow and I attach the > debug log from capture image. > > I hope this gives you sufficient information and thanks for looking at this, > and for all the great work on this project – it’s much appreciated. > > $ lsusb > Bus 002 Device 004: ID 33a2:0136 OMSYSTEM OM-1 > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > $ gphoto2 --auto-detect > Model Port > ---------------------------------------------------------- > USB PTP Class Camera usb:002,004 > bill@jim-laptop:~$ LANG=C gphoto2 --summary >summary.txt > bill@jim-laptop:~$ LANG=C gphoto2 --list-all-config >config.txt > > $ gphoto2 --capture-image > > *** Error *** > Sorry, your camera does not support generic capture > ERROR: Could not capture image. > ERROR: Could not capture. > *** Error (-6: 'Unsupported operation') *** > > For debugging messages, please use the --debug option. > Debugging messages may help finding a solution to your problem. > If you intend to send any error or debug messages to the gphoto > developer mailing list <gphoto-devel@lists.sourceforge.net>, please run > gphoto2 as follows: > > env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image > See my-logfile.txt attached > > Regards > Bill > +44 7901 954568 > > Sent with [Proton Mail](https://proton.me/) secure email. _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
