Hi Marcus, That's great, thanks very much for sorting this out so quickly. I had a bit of trouble getting gphoto2 to pick up the new version of libgphoto2 but that was due to my ignorance and it's all working properly now. I've not yet got it working from darktable but I'm sure that is something I can sort out.
Thanks again, very much appreciated. Regards Bill +44 7901 954568 Sent with Proton Mail secure email. ------- Original Message ------- On Saturday, July 29th, 2023 at 09:50, Marcus Meissner <mar...@jet.franken.de> wrote: > Hi, > > thanks for the report! > > I added code to the current libgphoto2 master branch to enable OM-1 for > capture. > > Judging from the debug it will probably work, but would like to have feedback > if it does :) > > Ciao, Marcus > On Mon, Jul 24, 2023 at 04:17:12PM +0000, bill.visick via Gphoto-devel wrote: > > > Hi, > > > > I’m trying to use an OM System OM-1 camera with libgphoto2 (actually so I > > can use it tethered from darktable) and it is not supported. I think this > > is because it’s too new: the earlier Olympus OMD EM1 mark 3 is supported. > > The results of the commands listed on your support page follow and I attach > > the debug log from capture image. > > > > I hope this gives you sufficient information and thanks for looking at > > this, and for all the great work on this project – it’s much appreciated. > > > > $ lsusb > > Bus 002 Device 004: ID 33a2:0136 OMSYSTEM OM-1 > > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse > > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > > $ gphoto2 --auto-detect > > Model Port > > ---------------------------------------------------------- > > USB PTP Class Camera usb:002,004 > > bill@jim-laptop:~$ LANG=C gphoto2 --summary >summary.txt > > bill@jim-laptop:~$ LANG=C gphoto2 --list-all-config >config.txt > > > > $ gphoto2 --capture-image > > > > *** Error *** > > Sorry, your camera does not support generic capture > > ERROR: Could not capture image. > > ERROR: Could not capture. > > *** Error (-6: 'Unsupported operation') *** > > > > For debugging messages, please use the --debug option. > > Debugging messages may help finding a solution to your problem. > > If you intend to send any error or debug messages to the gphoto > > developer mailing list gphoto-devel@lists.sourceforge.net, please run > > gphoto2 as follows: > > > > env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image > > See my-logfile.txt attached > > > > Regards > > Bill > > +44 7901 954568 > > > > Sent with Proton Mail secure email. _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
