On Thu, 19 Nov 2009, Thomas Miletich wrote: > Hi > Even if the UNDI driver works some times, in your setup it isn't > really supposed to work, and I'm surprised that it does.
What should cause a problem in my setup? Booting from a usb stick? btw: Why does "ifstat" show two different nic? PCI00:19.0 UNDI-PCI00:19.0 Does this mean, using DEBUG changes the behavior of gPXE? > Please try a gPXE build with DEBUG=e1000. It's definitely helpful if > you can use the serial console because there will be a lot of output. > Please try 'dhcp net0' with the debugging options enabled and capture > all the output on the serial port. Wait until the output stops, or at > least slows down(that means dhcp is finished). Then please put your > capture at http://etherboot.pastebin.com/ or attach it as a file to a > mail > I tried DEBUG=e1000 and get much output but still does not work. Unfortunately this notebook has no serial console. I will try to get a USB2SERIAL-Adapter and try to get the Debugging output tomorrow, before the owner takes back his notebook next week. Patrick _______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
