Hello! I have problem booting from gpxe rom flashed into bios. What I'm doing: - get ROM binary for rtl8139 chipset (set vendor:device = 10ec:8139) from rom-o-matic 0.9.9 gpxe; - add this rom to bios rom on motherboard; - trying to boot; - Computer hangs with message: "gPXE (PCI 02:15.0) starting execution"
If I press Ctrl-B keys on early boot (before network boot) - gpxe do not hang and allow me execute commands: > ifstat net0: 10:e0:0c:40:xx:xx on PCI02:15.0 (closed) [Link:up, TX:0, TXE:0, RX:0, RXE:0] > dhcp net0 DHCP (net0 10:e0:0c:40:xx:xx). ok > autoboot net0: 10:e0:0c:40:xx:xx on PCI02:15.0 (closed) [Link:up, TX:3, TXE:0, RX:6, RXE:0] DHCP (net0 10:e0:0c:40:xx:xx). ok net0: 192.168.60.2/255.255.255.0 gw 192.168.60.100 Booting from PXE menu PXEBS (net0 type 128). ok tftp://192.168.60.42/pxelinux.0. ok And hangs also. If I get "Linux kernel loadable image" from rom-o-matic 0.9.9 gpxe and chainload this image from GRUB, then gpxe boot perfectly in current proxyDHCP environment. Please help. -- Kasatkin Nikolay
_______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
