I tried to install win2008 using winpe 2.1 or 3.0 without luck.
I followed the below procedure:
http://etherboot.org/wiki/sanboot/win2k8_iscsi_install
dhcp net0
set keep-san 1
sanboot iscsi:192.168.1.11::::iqn.2007-08.name.dns.target.my:iscsiboot
chain tftp://192.168.1.11/boot/pxeboot.n12
after sanboot, it said something like "bios has registered .... preserving
connection, boot failed...."
after winpe was loaded, I ran the following commands:
net use f: \\192.168.1.111\win2008
f:\setup.exe
the win2008R2 (32bit) installation could not recognise any iscsi harddisk (the
PC has no HDD).
Is there any method to check the existance of iscsi disk in winpe?
Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多!_______________________________________________
gPXE mailing list
[email protected]
http://etherboot.org/mailman/listinfo/gpxe
