i fixed it as i defined the gateway.
--- 2010年2月9日 星期二，Aclhk Aclhk <[email protected]> 寫道﹕
寄件人: Aclhk Aclhk <[email protected]>
主題: [gPXE] install win2008 to san
收件人: [email protected]
日期: 2010年2月9日,星期二,上午8:48
I tried to install win2008 using winpe 2.1 or 3.0 without luck.
I followed the below procedure:
http://etherboot.org/wiki/sanboot/win2k8_iscsi_install
dhcp net0
set keep-san 1
sanboot iscsi:192.168.1.11::::iqn.2007-08.name.dns.target.my:iscsiboot
chain tftp://192.168.1.11/boot/pxeboot.n12
after sanboot, it said something like "bios has registered .... preserving
connection, boot failed...."
after winpe was loaded, I ran the following commands:
net use f: \\192.168.1.111\win2008
f:\setup.exe
the win2008R2 (32bit) installation could not recognise any iscsi harddisk (the
PC has no HDD).
Is there any method to check the existance of iscsi disk in winpe?
Yahoo!香港提供網上安全攻略，教你如何防範黑客!了解更多
-----內含下列附件-----
_______________________________________________
gPXE mailing list
[email protected]
http://etherboot.org/mailman/listinfo/gpxe
Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多!_______________________________________________
gPXE mailing list
[email protected]
http://etherboot.org/mailman/listinfo/gpxe
