I used g.region to set the resolution from 10m to 100m, then to 1m.
on 100m I get
PNG: GRASS_TRUECOLOR status: TRUE
PNG: collecting to file: /Users/kurtsprings/grassdata/OSI0834/
PERMANENT/.tmp/Kurt-Springs-MacPro.local/5417.0.ppm,
GRASS_WIDTH=309, GRASS_HEIGHT=482
d.rast(5512) malloc: *** mmap(size=1206358016) failed (error code=12)
*** error: can't allocate region
*** set a breakpoint in malloc_error_break to debug
G_malloc: out of memory
on 1m I get
PNG: GRASS_TRUECOLOR status: TRUE
PNG: collecting to file: /Users/kurtsprings/grassdata/OSI0834/
PERMANENT/.tmp/Kurt-Springs-MacPro.local/5417.0.ppm,
GRASS_WIDTH=309, GRASS_HEIGHT=482
d.rast(5528) malloc: *** mmap(size=1206358016) failed (error code=12)
*** error: can't allocate region
*** set a breakpoint in malloc_error_break to debug
G_malloc: out of memory
Other project locations, set at 10m are okay.
Kurt
On Nov 20, 2008, at 6:59 PM, Glynn Clements wrote:
Kurt Springs wrote:
I am running into a problem I've never seen before. I was trying to
digitize a vector file. I had imported it from a dxf file and was
trying to close up some vectors points. Suddenly v.digit closed, and
when I tried to reopen I got:
v.digit(4314,0xa0371fa0) malloc: *** mmap(size=1207963648) failed
(error code=12)
*** error: can't allocate region
*** set a breakpoint in malloc_error_break to debug
G_malloc: out of memory
When I tried to open my raster map I got:
PNG: GRASS_TRUECOLOR status: TRUE
PNG: collecting to file: /Users/kurtsprings/grassdata/OSI0834/
PERMANENT/.tmp/Kurt-Springs-MacPro.local/4266.0.ppm,
GRASS_WIDTH=309, GRASS_HEIGHT=482
d.rast(4325) malloc: *** mmap(size=1206358016) failed (error code=12)
*** error: can't allocate region
*** set a breakpoint in malloc_error_break to debug
G_malloc: out of memory
I tried opening a different project location and it still works. Can
anyone tell me what is wrong and how to get this project location up
and running again, or what went wrong to begin with.
The most likely reason is that the region resolution is too fine. Use
"g.region res=..." to change it, or "g.region -d" to restore the
default region.
--
Glynn Clements <[EMAIL PROTECTED]>
_______________________________________________
grass-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/grass-user
