I have noticed that grml2hd (I use it to put grml onto a usb key) sets up grub (I know grub so I always chose to install it over lilo) to boot from the second hard drive. i.e. (hd1,0) (that is likely where it was was when the live version was run) But when you want to boot it, the hardware has detected it first and put it in the first position (hd0,0). If this is the case for you, you will have to muck about in the boot manager to resolve the problem.
2009/7/24 wonderer <[email protected]> > Hy, > > I want to do the HDInstall to a SD Card wich is inserted in a eeePC901 > SD-Card Slot. > When I boot up from an USB-Stick with the grml Live-Image and choose > HDInstall all seems to be Ok. But after reboot grml always failed to > load (no OS found). I also tryed to install the bootmanager into > partition /dev/sdd1 and MBR of /dev/sdd but no effekt. The internal SSD > I do not want to have edited with the bootmanager. If I look on the > SD-Card there seem to be all files. Is there a way that this could run? > > best regards > Henrik > _______________________________________________ > Grml mailing list - [email protected] > http://lists.mur.at/mailman/listinfo/grml > join #grml on irc.freenode.org > grml-devel-blog: http://grml.supersized.org/ >
_______________________________________________ Grml mailing list - [email protected] http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
