On Fri, 24 Jul 2009 16:41:21 -0400, Sean Kennedy wrote: > I have noticed that grml2hd (I use it to put grml onto a usb key) sets > up grub (I know grub so I always chose to install it over lilo) to boot > from the second hard drive. > i.e. (hd1,0) > (that is likely where it was was when the live version was run) But when > you want to boot it, the hardware has detected it first and put it in > the first position (hd0,0). > If this is the case for you, you will have to muck about in the boot > manager to resolve the problem.
If it is the case, then the best solution is Boot by UUID or disk label http://xpt.sourceforge.net/techdocs/nix/disk/boot/boot03- LinuxSpecificBooting/ar01s03.html I.e., Stable root device (AKA UUID) http://michael-prokop.at/blog/2006/08/11/stable-root-device-aka-uuid/ HTH -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/techdocs/ http://xpt.sourceforge.net/tools/ _______________________________________________ Grml mailing list - [email protected] http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
