This bug was fixed in the package nplan - 0.32~16.04.3

---------------
nplan (0.32~16.04.3) xenial; urgency=medium

  * tests/integration.py: Really fix skipping test_routes_v6 for the NM
    backend.

nplan (0.32~16.04.2) xenial; urgency=medium

  * tests/integration.py: Fix test_routes_v6 that I clobbered when I re-applied
    the skip rules for 16.04 after merging in 0.32.

nplan (0.32~16.04.1) xenial; urgency=medium

  * Backport netplan 0.32 to 16.04. (LP: #1713142)
  * debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
    feature backported in that revision.
  * tests/integration.py: Skip tests that are still not yet supported in xenial

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
    through interaces may affect things here. Also make sure the tests catch
    a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
    dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
    failing right from the start when systemd-networkd is disabled.
    (LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
    120 seconds, autopkgtest infrastructure tends to be a little slow for the
    network device configuration to be applied and noticed by NM.
    (LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
    as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
    of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
    for now, but intended to allow users to mark some devices as optional: to
    make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
    exists. nplan is enabled by default, so it might well have the directory
    already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
    broke default network config in LXD and was contrary to the defaults used
    by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
    allow users to disable processing Router Advertisements when required by
    their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
    (LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
    - Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
    - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
      rebind. (LP: #1712224)
  * Autopkgtests:
    - Add allow-stderr. Systemd now bleats about a the networkd socket still
      being around and enabled when we restart the service; but we don't need
      to care since we're /restarting/ the service to load the new config.
    - Fix the autostart package to be more sensible: we don't really care if
      networkd autostarts or not, but we need to make sure that our generator
      will run at boot, so instead check the state, but only assert it once
      we've added a config file and before checking the state of our dummy
      device.
    - Do a bit more to make sure "mix" tests which stack virtual devices are
      as reliable as possible; by setting saner defaults.

nplan (0.25) artful; urgency=medium

  * tests/generate.py: add a test to validate that correct blacklist entries
    are added when creating virtual devices.
  * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
    the remaining interface and udev configuration can confuse NetworkManager
    now that it seems to manage random devices it did not create again.
    (LP: #1699371)
  * src/nm.c: set the MTU even though we also specify it in systemd-networkd
    for consumption by udev. NetworkManager will try to set it and might
    otherwise default to the wrong value.
  * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
    same config, SLAAC), and don't have static addresses set. This should fix
    the cases where unconfigured devices still get an IPv6 address.
    (LP: #1655440)
  * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
    configured; this follows the same logic as setting IPv6AcceptRA=no in
    networkd, with the exception that NM does not currently disable RAs. When
    it does, an unconfigured device for IPv6 will truly be left with no config.

nplan (0.24) artful; urgency=medium

  * debian/control: set Priority to important to make sure we can get into
    minimal.

 -- Mathieu Trudel-Lapierre <cypher...@ubuntu.com>  Mon, 04 Dec 2017
10:57:34 -0500

** Changed in: nplan (Ubuntu Xenial)
       Status: Fix Committed => Fix Released

** Changed in: nplan (Ubuntu Zesty)
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

Status in nplan package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released
Status in nplan source package in Xenial:
  Fix Released
Status in systemd source package in Xenial:
  Fix Released
Status in nplan source package in Zesty:
  Fix Released
Status in systemd source package in Zesty:
  Fix Released
Status in nplan source package in Artful:
  Fix Released
Status in systemd source package in Artful:
  Fix Released

Bug description:
  [Impact]
  Some complex bond configurations require setting a "primary" interface for 
the bond, or setting this greatly improves performance on the network bond.

  [Test case]
  See below for a configuration example.
  1) Apply configuration on a system with netplan.
  2) Run 'netplan apply'
  3) Validate that netplan apply does not return with an error
  4) Validate that netplan properly sets the "primary_slave" value on the bond. 
This can be verified by looking at /sys/class/net/<bond 
interface>/bonding/primary_slave.
  5) Validate that there are no parsing errors from systemd-networkd in the 
journalctl

  [Regression potential]
  If existing configuration fails to be parsed, or lack of primary interface 
breaks configuration for existing bonds, this would be a regression caused by 
this update.

  ---

  ifenslave/eni support a bond parameter:  bond-primary which accepts an
  interface name that can be used to tell the kernel bonding driver
  which interface it should preferred in active-backup (and other
  modes).  This config option is missing in netplan.

   % cat bond-primary.yaml
  network:
    version: 2
    ethernets:
      eth0:
        match:
          driver: virtio
      ens4:
        match:
          driver: e1000
    bonds:
      bond0:
        parameters:
          mode: active-backup
          mii-monitor-interval: 100
          primary: e1000
        dhcp4: true

  % ./generate -r `pwd`/target
  Error in network definition 
/home/rharper/work/git/netplan/target//etc/netplan/bond-primary.yaml line 12 
column 8: unknown key primary

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

_______________________________________________
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to     : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

Reply via email to