Uhmmmm.... "Whatch you talkin about Willis?" All you need to remove/loosen is the the rocker cover. Dont bother undoing the cam bolts or anything like that. Just rotate the cams so the lobe of the rocker you are removing is not opening the valve.
--- In [email protected], "manay005" <[EMAIL PROTECTED]> wrote: > > Cool!! Will have to give it a shot ASAP.. > > I gather I follow the Torque specs like the 4G63... > > Thanks > > --- In [email protected], "Lon" <[EMAIL PROTECTED]> wrote: > > > > No probs with te process. The first time I got a mate to help me > out > > just in case, but it can be done with one person. The rockers will > > come off the lfters and valve tops without much effort. I used a > > small crow bar to leaver them off with the fulcrum point on bits > > between the bolts. You wil see the places when you actually do it. > > > > I soaked them in some Kero for a week, then a can of carby cleaner > > squirted in all of them to get the gunk out then soaked them again > > in some of that lifter free stuff. > > > > I cheated as I had a spare old set lying around that I did this > with > > which meant I didnt have my car off the road. ;) > > > > Lon. > > > > --- In [email protected], "manay005" <[EMAIL PROTECTED]> wrote: > > > > > > Lon, > > > > > > Thanks for that,... > > > > > > So there are no obvious probs with the process.. and the rocker > > arms > > > should come straight of the lifters?? > > > > > > What do you soak them in too loosen them up? > > > > > > heheh.. I'll make sure i shove rags in all the areas where > things > > can > > > drop... > > > > > > thanks > > > > > > --- In [email protected], "Lon" <[EMAIL PROTECTED]> wrote: > > > > > > > > Ive used the process they discribe a few times now, and you > dont > > > > even need to loosen off the cams to get the lifters out on the > > > 4g93. > > > > Can be done in an hour or so. > > > > > > > > Just dont drop anything down in the oil holes that end up in > the > > > > sump ;) > > > > > > > > --- In [email protected], "manay005" <[EMAIL PROTECTED]> > wrote: > > > > > > > > > > Hi guys... > > > > > > > > > > I have seen the instructions for the lifter > > removal/replacement > > > > from > > > > > Vfaq.com based on the 4G63... > > > > > Has anyone followed these for a 4G93?? > > > > > Is it a similar process or are there different issues?? > > > > > Thanks ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/_nTolB/TM --------------------------------------------------------------------~-> Community email addresses: Post message: [email protected] Unsubscribe: [EMAIL PROTECTED] List Owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/gsr_evo/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
