yeh but your springs r fkd
i have never had an issue 17s (always had 205/40) and she's been to qld a few times loaded up and i have ce superlows on the rear and i dont think johnny rc cars are better has had much with either either ! --- In [email protected], "David Kirk" <[EMAIL PROTECTED]> wrote: > > Offset 38mm > > I have the Full whiteline Low kit on mine benny and my 17's only rub > when I launch or hard change, I have had all my guards rolled as > well. I would recommend keeping it at almost stock height or get a > set of coil overs so you can adjust for heavy loads. I can only take > 1 passenger in the front and 1 in the back anymore equals rear tyres > hitting. > > Dave > > --- In [email protected], "bennygsr007" <[EMAIL PROTECTED]> > wrote: > > > > i currently have 16 (205/45) inch wheels on my stock suspension GSR. > > I have recently looked into some 17's (buddy club P1s, tit. silver > for my champagne colour > > GSR) These would have 215/40 tyres on them. Would I have to lip > the guards if i get > > these. In the future I may also consider lowering it (only a small > amount,say 2-3 cm ?) > > > > > > > > If the 17's are going to be require body work, I wont want them. I > also load my car up on > > long trips, and don't want any rubbing. If so, i'll stick with the > same size as i currently > > have. > > > > Also, can anyone tell me the wheel "offset" for my car > > > > Thanks > > Benny GSR ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/_nTolB/TM --------------------------------------------------------------------~-> Community email addresses: Post message: [email protected] Unsubscribe: [EMAIL PROTECTED] List Owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/gsr_evo/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
