Hello! Any suggestions where to get a data logger and data cable for Evo 1-3?
Evo4 up uses Mitsulogger and tactrix cable and laptop. Can this work on Evo 1-3? Alvin ----- Original Message ----- From: Paulo To: [email protected] Sent: Saturday, February 10, 2007 10:46 PM Subject: [GSR_EVO] Re: 4G93T lancer gsr injectors Hi, thanks for the info, i have the injectors working without a resistor pack and the ecu is still working ok, i am a lucky person, i have installed the solenoid that cuts the boost pressure to the fpr and it is working ok, the problem could be the resistor pack, i will try to find a resistor pack from a eclipse, i think it would be the same,does some one have a wiring diagram from a gsr ecu??, it would be great, thanks. --- In [email protected], "shiftauz" <[EMAIL PROTECTED]> wrote: > > Hi, yes the injectors use a resistor pack. also on the standard setup > the fuel pressure regulator is switched to atmospheric pressure above > 2,500 rpm by the ecu. THis is so the fpr won't see any boost > pressure....maybe this is the cause of your concern. >
