Thanks Al
You need old M100 palm and download the software from here http://mmcdlogger.sourceforge.net <http://mmcdlogger.sourceforge.net/> >From Hisham :-) Mon, 24 Apr 2006 20:12:01 -0700 The software of the datalogger is freeware. Try MMCD http://mmcdlogger.sourceforge.net/. Logger cable is around 10-15USD. If you have a palm or laptop, you can connect your computer to your ecu and get realtime feedback from the ECU. The MMCd software is palmtop base, if you want to run it on a PC/Laptop with Windows OS, you need a palm emulator. Its also freeware. You can try searching the net for other alternative softwares and devices. That A/F gauge is more on aesthetics. You can't rely on the output because every second or less the o2 output changes. You need a logger to monitor o2 output on every RPM increment. I believe your 93 GSR ECU is still OBD1. Correct me if I'm wrong, because I'm more familiar with 63Ts. The 97 ECu with 4 sockets I believe is an OBDII. "is the o2 sensor the same as the 95 gsr"- That I dont know, but I think most Mitsu turbo o2 sensors give the same reading. 0-1v. _____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Allan Oliveira Sent: Tuesday, 13 February 2007 11:18 PM To: [email protected] Subject: Re: [GSR_EVO] Software/Data Cable for Lancer GTi (Brazil) Claudio, You have some luck in that I can read Portuguese and translate your message so that someone can help you on the list. The bad news is I can't write in Portuguese so hopefully you can read english! ha! Guys, the message translates roughly to. Hi, I have a 95 Lancer GTi, code: CB5A and 4G93 non-turbo engine and it's OBD2 compatible. I have a data cable for OBD2 with ELM 323, diverse proticols including ISO 9141 but I can't find the software to read the information from the ECU. Can anyone help point me in the right direction? Thanks, I've never tried data logging but I seem to remember some discussion about this on the list... Cheers, Al On 13/02/2007, at 6:53 PM, csberny wrote: Bom dia, possuo um Lancer GTi 95, Codigo CB5A, Motor 4G93 (N/T) e ele é OBD2 compatível. Tenho o cabo de dados OBD2 com ELM 323, Protocolos diversos inclusive ISO 9141, mas não consigo o software para ler as informações da ECU. Alguém poderia me ajudar indicando algum? Obrigado, Cláudio dos Santos Berny Pelotas - RS - Brasil
