Thanks Nick,
I couldn't find the right words to explain the way the wires are fastened into
the coils.
"melted" was not right.
I've printed the article to be sure I can use it even if the article is taken
away from the website.
http://www.xs11.com/tips/repair/repair24.shtml
John Dreuning
http://home.planet.nl/~dreuning
"nicholas.threader" wrote:
> >The Yamaha sparkplug wires are melted into the coils so you
> >can't change them in a normal way.
>
> When mine shorted out around the HT lead , i removed the clips on the coil
> holding the leads ( breaking them in the process ) and found that the leads
> pull out .
> Then i cut the lead back to remove the corrosion from the end and sprayed
> WD40 into the coil to drive out any moisture , then pushed the lead back in
>
>
> atb Nick T
