On Sun, Sep 22, 2013 at 09:44:18PM +0200, Ludovic Courtès wrote: > In such cases, we must set the RUNPATH, using patchelf as Nikita notes. > The recommended way to do that is to use ‘augment-rpath’ from (guix > build rpath), as done in python.scm (make sure to add ‘patchelf’ as an > input).
When copy-pasting the phases argument from python-2 into cdparanoia, the build phase fails as follows: phase `strip' succeeded after 0 seconds starting phase `add-lib-to-runpath' Backtrace: In ice-9/boot-9.scm: 157: 15 [catch #t #<catch-closure 1cb5d20> ...] In unknown file: ?: 14 [apply-smob/1 #<catch-closure 1cb5d20>] In ice-9/boot-9.scm: 63: 13 [call-with-prompt prompt0 ...] In ice-9/eval.scm: 432: 12 [eval # #] In ice-9/boot-9.scm: 2320: 11 [save-module-excursion #<procedure 1ce4bc0 at ice-9/boot-9.scm:3961:3 ()>] 3966: 10 [#<procedure 1ce4bc0 at ice-9/boot-9.scm:3961:3 ()>] 1645: 9 [%start-stack load-stack ...] 1650: 8 [#<procedure 1ceadb0 ()>] In unknown file: ?: 7 [primitive-load "/nix/store/m95ni0aq76l1vrlvdjrz2g4gw13md321-cdparanoia-10.2-guile-builder"] In ice-9/eval.scm: 387: 6 [eval # ()] In /nix/store/5kbwbhzkvndzlx0yldg3532xn7j74cwz-module-import/guix/build/gnu-build-system.scm: 368: 5 [#<procedure 1ef74c0 at /nix/store/5kbwbhzkvndzlx0yldg3532xn7j74cwz-module-import/guix/build/gnu-build-system.scm:364:9 (expr)> #] In ice-9/r4rs.scm: 90: 4 [dynamic-wind #<procedure 221f540 at ice-9/eval.scm:416:20 ()> ...] In ice-9/eval.scm: 387: 3 [eval # #] 386: 2 [eval # #] 393: 1 [eval # #] In unknown file: ?: 0 [memoize-variable-access! #<memoized cut> #<directory (guile-user) 1ca7c60>] ERROR: In procedure memoize-variable-access!: ERROR: Unbound variable: cut As if an import of module srfi-26 were missing somewhere, but both python and cdparanoia use the same gnu build system. Andreas
