Hi Bill,
I have had Magic Jack and like it but can't find where to change the
output volume control. I saw your message but can't find where to go to raise
the output volume I am using Windows XP service pack 3 and of course Window
Eyes 7.01.
----- Original Message -----
From: Bill Reif
To: GW Info
Sent: Monday, November 03, 2008 6:50 AM
Subject: Jacking up the Magicjack output volume
Hello list,
Firstly, I want to thank Curtis Delzer for helping me solve the problem
described below. His solution does indeed get around the inaccessibility of
the Magicjack menu sliders. It took me a while to get around to implementing
it; but my experiences in both talking to people through Majicjack and trying
to hear very quiet Magicjack callers on the other end have urged me to clarify
his message.
The Magicjack's handset volume is generally ok. It's the output volume that
needs to be adjusted. The easiest way to do that is to go to your control
panel and choose "Sounds and Audio Devices". Unless you want to adjust
Magicjack volume on your end, tab past the playback device and its
corresponding volume setting button. You will reach a device selection combo
box, which you will temporarily want to change to "USB Internet Phone by
Tigerjet" so as not to change your sound card recording level. Choosing the
volume control button should take you to the wave in dialog. Unless you have a
very good mike in your phone, you will want to simply press the home key to max
the volume and Alt-F4 out of that box. You should land back in the Audio
Settings box. Don't forget to change your default audio device back to what it
was previously.
I hope people find this helpful.
Bill
----- Original Message -----
From: Curtis Delzer
To: Window-Eyes discussion list
Sent: Saturday, September 06, 2008 9:18 AM
Subject: Re: accessing and moving the sliders on the Magicjack interface
use standard volume control, and select theUSB Internet Phone by TigerJet
device. You will find the volume you wish there.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body
of the message
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body
of the message.
