Hi,
Oh fu.. I forgot of SDK, now I'm at home :D. Yes, it cost 700 USD I think
and there are 50 or 200 licences only.
I'm apologize, but it's a pity.
With best regards,
Marek Durila
IBM Global Services Delivery Center Czech Republic, s.r.o., Sídlo: Brno,
Technická 2995/21, PSC 61600
IC: 26244535, Zapsaná v obchodním rejstríku, vedeném Krajským soudem v Brne
oddíl C, vložka 39922
IBM Global Services Delivery Center Czech Republic, s.r.o., Registered
address: Brno, Technicka 2995/21, Zip code: 61600
Company ID: 26244535, Entered in the Commercial Register maintained by the
Regional Court in Brno (Part C, Entry 39922)
"Jim Grimsby JR."
<jgrim...@roadrun
ner.com> To
<[email protected]>
24/01/2010 22:38 cc
Subject
RE: synthesizers
It would of course be possible, yes. The problem here is that in order to
do this. GW micro would have to license the SDK and licensing the SDK is
about the same as licensing the voices themselves. Also, you have to
consider the development time to develop the driver and then the beta test
cycle to debug the driver.
Therefore it is unlikely that GW micro would be willing to devote the
development time required to create such a direct driver. Unless of course
GW micro was going to include the RealSpeak voices and window eyes. Or
they were going to purchase them in the license to sell them to end-users.
Hope this helps.
-----Original Message-----
From: Marek Durila [mailto:[email protected]]
Sent: Sunday, January 24, 2010 1:30 PM
To: Jim Grimsby JR.
Cc: [email protected]
Subject: RE: synthesizers
Hi,
I was thinking, if it would be possible to have direct voices RealSpeak and
not in SAPPY, it was only the question. I don't understand and don't know,
why Freedom has a Direct voices and not SAPPY, but it's true, that Czech
Eliska is faster in Direct voices.
Probably it's because SAPPY is a different driver and Direct is directly to
the voices, but it's only my hypotheses.
With best regards,
Marek Durila
IBM Global Services Delivery Center Czech Republic, s.r.o., Sídlo: Brno,
Technická 2995/21, PSC 61600
IC: 26244535, Zapsaná v obchodním rejstríku, vedeném Krajským soudem v Brne
oddíl C, vložka 39922
IBM Global Services Delivery Center Czech Republic, s.r.o., Registered
address: Brno, Technicka 2995/21, Zip code: 61600
Company ID: 26244535, Entered in the Commercial Register maintained by the
Regional Court in Brno (Part C, Entry 39922)
"Jim Grimsby JR."
<jgrim...@roadrun
ner.com> To
<[email protected]>
24/01/2010 16:47 cc
Subject
RE: synthesizers
Also please consider this the more software gw micro has to license from
outside sources the grater the cost of producing window-eyes. When the
cost
becomes grater gw micro will have to raze the price of window-eyes. So my
vote is to leave it like it is window-eyes including two of the most
responsive software solutions as if people want more software speech
solutions they can perches them. Maybe the compromise approach would be
for gw micro to support realspeak internally and offer a window-eyes
supported one for perches also it would allow for sapi support so it could
be used outside of window-eyes. That way you would have the best of both
worlds.
-----Original Message-----
From: Ralf Kefferpuetz [mailto:[email protected]]
Sent: Saturday, January 23, 2010 3:32 PM
To: 'Marek Durila'; 'Brandon Misch'
Cc: [email protected]
Subject: RE: synthesizers
I totally disagree. Nothing is faster as the Eloquence coming with
Window-Eyes and Jaws.
Ralf Kefferpuetz * Germany * MSN/Live: [email protected] * Aim:
RalfKatEMC * Skype/Yahoo: rkefferpuetz7747
http://blindpodcast.mypodcast.com
-----Original Message-----
From: Marek Durila [mailto:[email protected]]
Sent: Saturday, January 23, 2010 10:59 PM
To: Brandon Misch
Cc: [email protected]
Subject: Re: synthesizers
Hi,
Yes this is a true and I think, that it's pity.
But if GW-Micro made a contract between them and RealSpeak, could be nice,
because it's really faster then Sappy.
With best regards,
Marek Durila
IBM Global Services Delivery Center Czech Republic, s.r.o., Sídlo: Brno,
Technická 2995/21, PSC 61600
IC: 26244535, Zapsaná v obchodním rejstríku, vedeném Krajským soudem v Brne
oddíl C, vložka 39922 IBM Global Services Delivery Center Czech Republic,
s.r.o., Registered
address: Brno, Technicka 2995/21, Zip code: 61600 Company ID: 26244535,
Entered in the Commercial Register maintained by the Regional Court in Brno
(Part C, Entry 39922)
Brandon Misch
<bmisch2...@gmail
.com> To
[email protected]
22/01/2010 16:48 cc
Subject
Re: synthesizers
i think realspeak direct is a jaws only thing. window-eyes at one time did
have realspeak voices but gw never mentioned why after version 4.5 they
were
never on a cd anymore.
On Jan 22, 2010, at 1:18 AM, Marek Durila wrote:
> Hi,
> Will be implemented Direct voices from Real Speak as Jaws 10 has this?
> Because the echo is faster than SAPPY.
> With best regards,
> Marek Durila
>
> IBM Global Services Delivery Center Czech Republic, s.r.o., Sídlo:
> Brno, Technická 2995/21, PSC 61600
> IC: 26244535, Zapsaná v obchodním rejstríku, vedeném Krajským soudem v
Brne
> oddíl C, vložka 39922
> IBM Global Services Delivery Center Czech Republic, s.r.o., Registered
> address: Brno, Technicka 2995/21, Zip code: 61600 Company ID:
> 26244535, Entered in the Commercial Register maintained by
the
> Regional Court in Brno (Part C, Entry 39922)
>
>
>
>
> Brandon Misch
> <bmisch2...@gmail
> .com> To
> [email protected]
> 22/01/2010 06:42 cc
>
>
> Subject
> Re: synthisizers
>
>
>
>
>
>
>
>
>
>
> what would be a great feature to add as an update or new realease
> would
be
> for a synth to switch to either dectalk or eloquence if a synth they
> have chosen wasn't installed that way, the user won't have to go
> through unloading and reloading window-eyes just to get speech back.
> what do you all think?
>
> On Jan 21, 2010, at 4:12 PM, Raul A. Gallegos wrote:
>
>> If you have the synthesizer installed, you can just switch to it.
However
> if you don't have it installed, then you will not have speech when you
> switch to a non-existing synthesizer. if you find that you've lost
speech,
> you will need to switch to your old one by pressing control-backslash,
then
> alt-f, then y, then home, then d, then enter and that will at least
> get
you
> speech with the built-in DEC Talk Access 32 for Window-Eyes.
>>
>> Hope this helps.
>>
>> On 1/21/2010 11:35 AM, Kimsan Song wrote:
>>> Hi,
>>>
>>> Is it possible to sample the different synthisizers because I would
hate
>>> to click one and get no speech.
>>>
>>>
>>> If you reply to this message it will be delivered to the original
>>> sender only. If your reply would benefit others on the list and
>>> your message is related to GW Micro, then please consider sending
>>> your message to [email protected] so the entire list will receive it.
>>>
>>> All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
>>> and
> can be searched through and sorted using the search
>>> form at the bottom of the page.
>>>
>>> If you wish to unsubscribe from this list, visit:
>>>
>>> http://www.gwmicro.com/listserv
>>
>>
>> --
>> Raul A. Gallegos
>> GW Micro Technical Support Team
>> Voice 260-489-3671, Fax 260-489-2608
>> Web http://www.gwmicro.com..
>>
>> If you reply to this message it will be delivered to the original
>> sender only. If your reply would benefit others on the list and your
>> message is related to GW Micro, then please consider sending your
>> message to [email protected] so the entire list will receive it.
>>
>> All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
>> and
> can be searched through and sorted using the search
>> form at the bottom of the page.
>> If you wish to unsubscribe from this list, visit:
>>
>> http://www.gwmicro.com/listserv
>>
>
> If you reply to this message it will be delivered to the original
> sender only. If your reply would benefit others on the list and your
> message is related to GW Micro, then please consider sending your
> message to [email protected] so the entire list will receive it.
>
> All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
> and
can
> be searched through and sorted using the search form at the bottom of
> the page.
>
> If you wish to unsubscribe from this list, visit:
>
> http://www.gwmicro.com/listserv
>
If you reply to this message it will be delivered to the original sender
only. If your reply would benefit others on the list and your message is
related to GW Micro, then please consider sending your message to
[email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can
be searched through and sorted using the search form at the bottom of the
page.
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
Iy p imseti ledohogasd l fo p u nioe ei dyrea letGMr epa nd nnyrea
-fgioost tei lreetA -fmsea cv t/wgioogn,nc ah rga rdsghsrfmthbt ea.Iy
stuucbfmh s s:hp/wwc.misv
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can
be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can
be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can
be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it. All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the
searchform at the bottom of the page. If you wish to unsubscribe from this
list, visit: http://www.gwmicro.com/listserv
