David,
Nope, didn't say we increased the speed. I said we increased
responsiveness. How fast does it start and stop speaking is
responsiveness. And this shouldn't sound strange at all. If you open
the sound card, send the speech and close the sound card driver then you
will always get the active sound card but the process of opening and
closing the sound card can and usually is a very time consuming task
which can cause ugly responsiveness. You mention you didn't notice any
difference but I think if you polled the Window-Eyes users you would
find by far the majority have found a huge increase. Some sound cards
were effected more then others but most were greatly enhanced. The
speed of your machine had nothing to do with it. The quality of your
sound card driver however effected it greatly.
Windows XP doesn't have the ability to automatically switch when you
keep the sound card open all the time. Microsoft would have to answer
why that is the case... Microsoft has certainly fixed this in Windows
7. As for Vista it is hard to tell. We had issues just getting our USB
bluetooth dongle working under Vista.
Regards,
Doug
Given that Microsoft will
David wrote:
Hmmm! Do I get you right here? You increased the speed, and therefore
sound card cannot auto-switch any longer? If I get you right, that
sounds strange. How has speed anything to do with the switching
capability? And XP won't let you switch sound card? I don't get this,
unless something in your patch mismatch with XP. And just another
note; I don't really find the patch for Eloquence has sped up my
speech all that much. Then again, I am running XP on a 4gb, 2x2,7GHZ
machine, so the power of the machine should by far be enough for WE.
But as I said, for me that whole patch for Eloquence never really made
that much of a difference. And if the auto-switching of sound card got
lost... Well, I never seen GW mentioned this drawback for the XP (and
maybe Vista) users, mentioned before. Maybe I have overlooked
something, but if not, I find it is a bit late to tell us about the
loss of one of the features.
:):)
----- Original Message ----- From: "Doug Geoffray" <[email protected]>
To: "Yusuf" <[email protected]>
Cc: "GW Info" <[email protected]>
Sent: Saturday, May 08, 2010 4:48 PM
Subject: Re: 7.2 and alternative sound output
That is correctly. Window-Eyes 7.2 (or 7.11 with the Eloquence
patch) has greatly increased the responsiveness of the speech. There
is no comparison between the two. But in doing this Windows XP users
lost the ability to automatically switch when the default sound card
changed on the fly. So yes, Windows XP users regressed in this
respect but we feel the far superior response time is worth it. Also
as Aaron stated, Windows Vista and Windows 7 will do the auto switching.
Regards,
Doug
Yusuf wrote:
That's very odd Aaron as until I upgraded yesterday it was working
as I described in my original message.
Yusuf
----- Original Message ----- From: "Aaron Smith" <[email protected]>
Cc: "GW Info" <[email protected]>
Sent: Friday, May 07, 2010 9:32 PM
Subject: Re: 7.2 and alternative sound output
Sound card switching is only supported under Windows Vista and up.
Windows XP doesn't let us do it.
Aaron
On 5/7/2010 4:31 PM, Yusuf wrote:
Aaron Windows XP Home. Sorry should have said. Its a plantromics
wireless headset.
Yusuf
----- Original Message ----- From: "Aaron Smith" <[email protected]>
Cc: "GW Info" <[email protected]>
Sent: Friday, May 07, 2010 9:02 PM
Subject: Re: 7.2 and alternative sound output
Yusuf,
What version of Windows are you using?
Aaron
On 5/7/2010 3:58 PM, Yusuf wrote:
Hi all, I'm really liking the responsiveness of WE 7.2. I have one
question. In WE 7.1 if I plugged in a USB wireless set of
headphones
and switched the primary sound, (control panel sounds and audio
devices), to the headphones all sound coming out of the PC
including
WE would come from the headphones. In this version of WE I have
to go
in to the synthesiser selection, (WE control panel), and choose it.
After I unplug the USB wireless headphones I have to restart WE in
order to get sound to come out of the main speakers even though for
all other computer sounds it automatically switches.
Is there any way to get WE to automatically switch in the way
that it
did with the previous version.
Cheers
Yusuf If you reply to this message it will be delivered to the
original sender only. If your reply would benefit others on the
list
and your message is related to GW Micro, then please consider
sending
your message to [email protected] so the entire list will
receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at
http://www.gwmicro.com/listserv.
--
Aaron Smith
Product Support Specialist * Web Development
GW Micro, Inc. * 725 Airport North Office Park, Fort Wayne, IN 46825
260-489-3671 * gwmicro.com
To insure that you receive proper support, please include all past
correspondence (where applicable), and any relevant information
pertinent to your situation when submitting a problem report to
the GW
Micro Technical Support Team.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and your
message is related to GW Micro, then please consider sending your
message to [email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at
http://www.gwmicro.com/listserv.
__________ NOD32 5096 (20100507) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and your
message is related to GW Micro, then please consider sending your
message to [email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at http://www.gwmicro.com/listserv.
--
Aaron Smith
Product Support Specialist * Web Development
GW Micro, Inc. * 725 Airport North Office Park, Fort Wayne, IN 46825
260-489-3671 * gwmicro.com
To insure that you receive proper support, please include all past
correspondence (where applicable), and any relevant information
pertinent to your situation when submitting a problem report to the GW
Micro Technical Support Team.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive
it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at http://www.gwmicro.com/listserv.
__________ NOD32 5096 (20100507) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and your
message is related to GW Micro, then please consider sending your
message to [email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and your
message is related to GW Micro, then please consider sending your
message to [email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at http://www.gwmicro.com/listserv.
--
I am using the free version of SPAMfighter.
We are a community of 7 million users fighting spam.
SPAMfighter has removed 1701 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
