Since I don't have a braille display, should I used the quick start app and tell the system I want no braille?
----- Original Message ----- From: Michael D. Lawler To: [email protected] Sent: Tuesday, April 05, 2011 10:35 AM Subject: Re: My braille is being set to on in General, Core functions This is a program specific setting not a global one so when you turn it off it is only for the program that you are in. At 07:15 PM 4/4/2011, you wrote: I have made sure braille is turned off in the control panel area mentioned in the subject of this message, but it is showing as "on" now. This has happened a few times before, but I can't duplicate it. It's just that once in a while, when I check, General, Core Functions, Braille is set to on when I had it turned off. I just now set it to off an saved the set file, but I'm sure it will eventually come back to "on". I'll try to see when or what I may have done to make this happen. This is the best report I can give now. Anybody else having this oddity? I kknow it used to be a problem with the beta, but things are a lot bettern now, but in the case of Braille, it seems to still be happening. Steve -- Michael D. Lawler Voice 260-489-3671 Fax 260-489-2608 Internet mailto:[email protected] web http://www.gwmicro.com ftp ftp://ftp.gwmicro.com GW Micro, Inc., Development Liaison and Technical Support Supervisor If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
