This is equal to going to devices braille displays and setting the
chosen display to none. This is all you need to do.
At 02:01 PM 4/5/2011, you wrote:
Since I don't have a braille display, should I used the quick start
app and tell the system I want no braille?
----- Original Message -----
From: <mailto:[email protected]>Michael D. Lawler
To: <mailto:[email protected]>[email protected]
Sent: Tuesday, April 05, 2011 10:35 AM
Subject: Re: My braille is being set to on in General, Core functions
This is a program specific setting not a global one so when you turn
it off it is only for the program that you are in.
At 07:15 PM 4/4/2011, you wrote:
I have made sure braille is turned off in the control panel area
mentioned in the subject of this message, but it is showing as "on"
now. This has happened a few times before, but I can't duplicate
it. It's just that once in a while, when I check, General, Core
Functions, Braille is set to on when I had it turned off. I just
now set it to off an saved the set file, but I'm sure it will
eventually come back to "on". I'll try to see when or what I may
have done to make this happen. This is the best report I can give now.
Anybody else having this oddity? I kknow it used to be a problem
with the beta, but things are a lot bettern now, but in the case of
Braille, it seems to still be happening.
Steve
--
Michael D. Lawler
Voice 260-489-3671
Fax 260-489-2608
Internet mailto:[email protected]
web http://www.gwmicro.com
ftp ftp://ftp.gwmicro.com
GW Micro, Inc.,
Development Liaison and Technical Support Supervisor
--
Michael D. Lawler
Voice 260-489-3671
Fax 260-489-2608
Internet mailto:[email protected]
web http://www.gwmicro.com
ftp ftp://ftp.gwmicro.com
GW Micro, Inc.,
Development Liaison and Technical Support Supervisor
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
