Yes it does. I've tried re disabling one and then the other. On one it
says can't find a driver. When I enable that one, I get the same error.
The other very odd thing is the install never comes up talking, I have
to use nvda. It does talk when I get the error though.
73
Butch
WA0VJR
Node 3148
Wallace, ks.
On Sat, 2 Jun
2012, net bat wrote:
do you have a dual mode display card?
i don't know if this would show in the device manager or not.
if so i think you have to disable one of them before w e will work because it
only supports one video display at a time.
-----Original Message----- From: Butch Bussen
Sent: Saturday, June 02, 2012 5:17 PM
To: net bat
Subject: Re: problem installing window-eyes
I removed we with the remove programs and also the emergency uninstall.
The card shows as an atei 1300. I poked around on line and ffound
drivers which I installed. We said video drivers had been changed and
needed to be rebooted. I did all that and no matter what I do, I get
same mesage. Video support has been installed, but is not running. I'm
about ready to pull my hair out, or learn how to use nvda better.
<smile>
73
Butch
WA0VJR
Node 3148
Wallace, ks.
On Fri, 1 Jun 2012, net bat wrote:
have you checked the windows video driver in the device manager? if it is
useing a genaric svga and not a driver designed for the manufacturers
display card the w e mirror driver may not work.
in this case the w e video driver would not load so it would not find the
driver when it loads.
have you used the emergency removal tool from the w e cd?
you have to uninstall w e from the add remove list first. then run the
tool to remove all the registry keys. use narrator because the advanced
control will not talk in the w e setup screen.
it takes about 30 seconds to remove w e and show a staement that w e has
been completely removed from your computer.
then try installing 7.0.
-----Original Message----- From: Butch Bussen
Sent: Friday, June 01, 2012 8:44 PM
To: net bat
Subject: Re: problem installing window-eyes
Yes, rebgooted several times. When I use the hot key, that is when I
get the video support is installed but not running. I also tried nvda
and it seems to run fine. The odd thing is the install with speech
doesn't speak either.
73
Butch
WA0VJR
Node 3148
Wallace, ks.
On Fri, 1 Jun 2012, net bat wrote:
> did you reboot a second time?
> the first time it will give you the video driver error. sometimes you
> have
> to reboot a second time.
> sometimes you have to load w e with the hot key control alt w. then
> check
> the startup options to see if it is set to load on log on etc.
> did you completeley uninstall version 6 before installing version 7?
> you may also have to use the emergency removal tool that is in the
> advanced button on the setup screen. but it will not speak unless you
> use
> narrator.
>
> -----Original Message----- From: Butch Bussen
> Sent: Friday, June 01, 2012 7:17 PM
> Cc: [email protected]
> Subject: problem installing window-eyes
>
> I bought a used Dell Optiplex GX745
> I can't seem to get window-eyes installed, tried 7.0 and 6.1. It
> doesn't
> come up talking during the install, so I have to use narrator. It
> seems
> to
> install, then says window-eyes has installed video support, but it is
> not
> yet running, you must reboot. When I reboot, nothing, just go round in
> circles. Any suggestions. What am I missing here?
> 73
> Butch
> WA0VJR
> Node 3148
> Wallace, ks.
>
> If you reply to this message it will be delivered to the original
> sender
> only. If your reply would benefit others on the list and your message
> is
> related to GW Micro, then please consider sending your message to
> [email protected] so the entire list will receive it.
>
> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
> manage your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original sender
only. If your reply would benefit others on the list and your message is
related to GW Micro, then please consider sending your message to
[email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
manage your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
