Hi!
Thanks for this but, Window Eyes is not speaking the commands or anything I
do when the command is pushed.
----- Original Message -----
From: "M and L Dorn" <[email protected]>
To: "Duyahn Walker" <[email protected]>; "Vinny Samarco"
<[email protected]>
Sent: Sunday, July 01, 2012 12:19 PM
Subject: Re: Cheet sheet for Goldwav and Window eyes
This was sent to me last November. Hope it's current and helpful.
Marilyn
Hi. If you have the Goldwave sets installed there are several hot keys you
can use.
The following is from the set file readme which you have access to:
Here are the Window-Eyes hot keys and windows that I have set in GW5.000.
Alt+s reads Window 3, which gives you the sampling rate, stereo or mono
and the wave sign.
alt+l reads Window 5, which gives you the total length of the sound file.
alt+m reads Window 6, which gives you the time from the start marker to
the finish marker.
Alt+n reads window 7, which gives you the length of the file between the
start and finish markers. Because this window changes size depending on
how long the file is, listen for the "left Paren" and the number inside
the parentheses is the new length between the start and finish markers.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
