Thank you all for your help. After I went through these steps, I was able to have my Sapi5-compliant Arabic voice airing through my Logitech wireless speaker successfully.
Thank you. Best Regards Ahmed Khater [email protected] It's always hope that gives meaning to life -----Original Message----- From: Tom Kingston [mailto:[email protected]] Sent: Monday, August 04, 2014 10:36 AM To: gw-info Subject: Re: Using Infovox4 Voices in Window-Eyes from the same sound card. With a SAPI synth you may have to set the sound card Windows uses for speech. This is because we cannot select the output device for SAPI synths in the WE control panel as we can with synths supported directly by Window-Eyes, e.g. Eloquence, DecTalk, Vocalizer. Here's how it's done in Windows 7. 1. Open the Windows control panel. 2. go to Speech recognition, then Text to speech. 3. Tab to the Advanced button and press spacebar. 4. Change the radio button from Use preferred audio device to Use this audio device. Tab once and select the device you want SAPI speech to use. 5. Tab to OK and hit spacebar. Do the same again. Then close the control panel. Hth, Tom On 8/3/2014 10:38 AM, Ahmed Khater wrote: > Hi all, > > I am using SAPI-compliant Arabic voices from the Acapela Infovox 4.0 > platform with Window-Eyes V8.4, using a Logitech Bluetooth headphone. > The problem is that Acapela Sapi-compliant voices insist to be aired > through the built-in PC sound card, whereas all other sounds go > through the Logitech Bluetooth headset. This is in spite of the fact > that I set up The Logitech Bluetooth headset as my default sound card. > > Is there any workaround for this issue? > > Thank you. > > Best Regards > > Ahmed Khater > [email protected] > It's always hope that gives meaning to life > > If you reply to this message it will be delivered to the original sender > only. If your reply would benefit others on the list and your message is > related to GW Micro, then please consider sending your message to > [email protected] so the entire list will receive it. > > GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can > manage your list subscription at http://www.gwmicro.com/listserv. > > If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
