Think I've done it, it depends if its readable or not. Jared Rimer The Jared Rimer network: where everything is listed in one convenient place. http://www.jaredrimer.net to check it out!
-----Original Message----- From: Alex Hall [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2008 8:26 AM To: [email protected] Subject: RE: [GWN] calculator, once more Out of curiosity, could you open a .ini file like that to see what it contained? Have a great day, Alex > ----- Original Message ----- >From: "Jared Rimer" <[EMAIL PROTECTED] >To: <[email protected] >Date sent: Wed, 16 Jul 2008 08:22:39 -0700 >Subject: RE: [GWN] calculator, once more >This sounds about right for the calculator behavior. But I bet if a factory >reset was done, but not sure, the items may be lost. I did find a file >called calc.ini I think it is where I would believe it stores everything, >but again not sure, but this was a good message. I can agree with Don. >Jared Rimer >The Jared Rimer network: where everything is listed in one convenient place. >http://www.jaredrimer.net to check it out! >-----Original Message----- >From: Vicky Collins [mailto:[EMAIL PROTECTED] >Sent: Tuesday, July 15, 2008 6:35 PM >To: [email protected] >Subject: RE: [GWN] calculator, once more >Hi All, >Well, grin, might as well try my hand at the calculator, too. >Guess all we can do is keep trying to figure out ways to use its >memory options. >First, although I know I do have an ailing VS battery or >something, or maybe I misunderstood Raul's message about the >calculator memory being cleared once the calculator program was >closed. For, on the VS, I was able to close the calculator, and >even do a reset with the button on the back of the unit, and my >items were still stored in the list when I did the backspace with >r to recall them. >Second, when I tried to save something in the calculator memory >to insert into a later calculation, I did the following and it >seemed to work: >One, From the main menu, press u for utilities and then c for >calculator. >Two, type 900 plus 100 and press enter to hear 1000. >Three, type backspace with s and give your calculation result a >name, such as checking, and then press enter and hear the VS say >save completed. >Four, and just for good measure, exit the calculator program, and >perhaps even do a reset with the button on the back. >Five, After the reset, go back into the calculator with u and >then c. >Six, type 100 plus and then type backspace with r and you should >hear then the recall items dialog with the name of checking >spoken, so press the enter key once to hear it spoken again as it >is being entered into your calculation and then press enter again >to hear it actually do the calculation and give the result of >1100. >Third, to insert a calculation into a document, I did the >following: >One, Go to the calculator with u and then c as described before. >Two, type 5 times 5 and press enter. >Three, type backspace with s and give this item a name such as >lunch and press enter. >Four, Exit the calculator and then go and start typing your >document. >Five, Then go back to the calculator with the f 1 and then u and >then c. >Six, Press backspace with r and you should hear the first of the >list of items in your calculator memory, such as checking one of >two. > Seven, down arrow to hear the second item in the list, such as >lunch two of two and press enter i to copy it to the clipboard, >or you can even tab to the display detail and down arrow once to >yes first and then continue tabbing back around to the list to >see your calculation details before copying to the clipboard if >you like. >Eight, press f 2 and f 3 to get back into your document, and then >press enter with v to paste the result of your calculation, or >just close the calculator and go back to the document and press >the enter with v to paste the results. >>----- Original Message ----- >>From: Rhonda Stogner <[EMAIL PROTECTED] >>To: [email protected] >>Date sent: Tue, 15 Jul 2008 18:59:22 -0800 >>Subject: [GWN] Calculator, Once More >>Hello Sharon, Chuck, and List: >> I am looking at the calculator once more. This is what I have >discovered about the memory. From the Main Menu, press U. Press >Enter at the calculator. Enter your number, but what I am >finding is, you would need to say something like 282.-4. Press >Enter twice. Press Backspace S, and a letter for your memory. >Press Enter. When you do another calculation, when you are in >the calculator menu, press R with Enter. Your memory will be >recalled. You have to remember that number to do the next >calculation. After you do your calculation, and go back to the >memory, you will be asked if you want to replace the result. I >can't see that you can do exactly what you'd like to do, as in >adding to memory, subtracting, and the things you'd do on a >normal calculator. Somehow, I feel like I'm not making much >sense, smile, not even to me. >__________ NOD32 3270 (20080715) Information __________ >This message was checked by NOD32 antivirus system. >http://www.eset.com __________ NOD32 3272 (20080716) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
