Very clear, thanks ----- Original Message ----- From: "Raul A. Gallegos" <[EMAIL PROTECTED]> To: [email protected] Date: 2008/08/15 13:31:41 Subject: Re: [GWN] Mac address question, again
> > > Hi. The BSP has two mac addresses. One is for the lan wired port and the > other is for the wireless connection. If you go into help/info you will > only see the lan wired mac address. This is not the one to give an isp > for wireless access. To get the wireless one, you will have to connect > to another wireless network and find the wireless mac address from the > network status space-n from the main program menu, or by pressing u then n. > > Hope this helps. > > Mike Keithley said the following on 8/14/2008 8:47 PM: > > A few days ago I explained to the list that I needed to give an ISP my MAC > > address so I could log onto their wireless network without a captia. > > > > I found the MAC address in the help facility, but I happened to explore > > "network status dialog" and read a "wireless LAN" MAC address, which is > > completely different. So which CAC address should I use? > > > -- > Raul A. Gallegos -- GW Micro Technical Support > Voice: 260-489-3671 -- Fax: 260-489-2608 > WEB: http://www.gwmicro.com
