Hi,
Are you absolutely sure you entered the correct key for your network? I
ask because it's easy not to get something in the proper case for example.
You should be able to turn on wireless which it sounds like you did.
Then go to setup internet. then select wireless lan. After several
seconds you should see the name for your network, possibly your router
manufacturer such as linksys.
I let my braillesense get the automatic settings for my router. The
only thing I changed from the defaults was to set wep key. Obviously,
if your router is using something else you'd select that. Then, enter
the key and be certain it is correct.
If you still cannot connect, I'd turn off encryption on the router for a
short test and see if you could connect the braillesense without
encryption. If you can, you'd know that the encryption is the culprit
and make any necessary changes to that.
Just e sure to enable encryption on your router again when you're
through testing.
Also, iff you have trouble connecting and try it too many times, you may
actually need to do a reset of the braillesense to get it to connect.
On 3/15/2010 6:33 PM, [email protected] wrote:
Rhonda, no message whatsoever. I know that wireless is not connected because
I check network status and it says wireless offline. I'm thinking about
connecting the modem and disconnect and see if that does anything when I
disconnect.
-----Original Message-----
From: Rhonda Stogner [mailto:[email protected]]
Sent: Monday, March 15, 2010 6:30 PM
To: [email protected]
Subject: RE: [GWN] Wireless
What I meant about File Manager was to go to utilities from
there. What kind of a message are you getting? Are you getting
"cannot connect to the pop 3 server?"
----- Original Message -----
From:<[email protected]
To:<[email protected]
Date sent: Mon, 15 Mar 2010 18:20:59 -0700
Subject: RE: [GWN] Wireless
Thank you for responding, I have made sure that wireless is
turned on in the
options menu and utilities--but I'm not sure what you're talking
about for
the file manager. I'm not sure where to go for that--if you mean
to reset
the whole Braille Sense, I've tried that and no doorbell sound.
Thanks.
-----Original Message-----
From: Rhonda Stogner [mailto:[email protected]]
Sent: Monday, March 15, 2010 6:10 PM
To: Gw Micro
Subject: [GWN] Wireless
Teal, one more thing about your wireless setup; when they're
turned on in the Options Menu, and Utilities, go back to the File
Manager, and reset. When your unit comes back on, you should
hear a little doorbell type ding-dong. Good luck, hope it works
for you.
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
__________ NOD32 4947 (20100315) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
If you wish to unsubscribe from this list, visit:
http://www.gwmicro.com/listserv
