Hello all! Still going round and round with cable company! I located my old router with adapter. I simply plugged it into the wall. There obviously isn't any internet connected to it! Once I plugged in my old router, I checked for internet connections and my VS recognized it immediately! I was asked for the WEP code which I typed in from memory. The Voice Sense connected to my old router just fine complete with door bell! My old router is an action tech modem router combination which worked with my DSL connection! My new router is a Netgear WRN3500L. It plugs into a modem which is connected to the cable and phone etc. A software called digi do is used to manage everything including how everything connects. I've asked about hidden SSID, they said if SSID were hidden, nothing could connect. They further stated there was no need to go in and change settings since it is set to optimum settings, forget it, all is well! Despite what they say that I have a b/g connection, VS is left out in the cold. It cannot see the router signal at all! The VS sees my old router and others in the neighborhood, but not mine! Apparently mine doesn't exist for some reason according to the vS (grin smile)! I tried going into 192.168.1.1 as instructed on the web. I get the log in info but I can't get in.
This is where things are at this time with the vS problem! I can't give you settings because I'm unable to get them even from the cable company! I'll keep checking! Take care and thanks for reading! Jim If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv
