BSP Screen Terminal stuckSounds like you are trying to make a usb connection. Have you downloaded and installed the usb driver from the GW web site and have you selected Braille sense as your display in Window-Eyes? If you have done all this set the BS for terminal mode and then start Window-eyes, If you already have WE running when you set the BS for terminal mode it want automatically pick up the Braille display sense WE was already running. If you already have WE running, you can also go to the WE control panel select file then Braille display and if Braille sense on usb is selected then just press enter on okay and it should initialize the display.
Robert ----- Original Message ----- From: Loescher, Martha To: [email protected] Sent: Tuesday, April 13, 2010 9:48 AM Subject: [GWN] BSP Screen Terminal stuck Hi All! I've been struggling for the past few days with trying to get my BSP terminal screen reader to get out of terminal mode and start reading the screen for me. It connects ok, but no braille from Window-eyes 7.2 bata comes on the display. I've studied the help until I can almost resite it with my "finters" closed! That's a funny! Anyway, anyone have any ideas? Mobile disk is off, I'm connected to the right port this time, but I don't know for sure what's up. The chimes sound in both machines, but that's as far as I get. Have a nice day, and thanks! Martha Loescher, Secretary Ohio Department of Natural Resources Division of Watercraft 2045 Morse Rd Bldg a-3 Columbus OH 43229 Phone: 614-265-6774 Email: [email protected] If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv
