Did that, all of it, and no braille. Initialized braille display as Robert indicated, works fine now.
-----Original Message----- From: Raul A. Gallegos [mailto:[email protected]] Sent: Tuesday, April 13, 2010 9:57 AM To: [email protected] Subject: Re: [GWN] BSP Screen Terminal stuck Hello. Please make sure you do the following in the proper order. 1. Turn off mobile disk. 2. Start the terminal for screen reader program. 3. Choose the connection type. 4. Connect the Braille Sense to the PC. 5. Tell Window-Eyes you are using the Braille Sense. It should work if you have done it this way. Also, you will have needed to install the Braille Sense drivers we offer on our site. Many thanks. On 4/13/2010 9:48 AM, Loescher, Martha wrote: > Hi All! > > I've been struggling for the past few days with trying to get my BSP > terminal screen reader to get out of terminal mode and start reading > the screen for me. It connects ok, but no braille from Window-eyes > 7.2 bata comes on the display. I've studied the help until I can > almost resite it with my "finters" closed! That's a funny! > > Anyway, anyone have any ideas? Mobile disk is off, I'm connected to > the right port this time, but I don't know for sure what's up. The > chimes sound in both machines, but that's as far as I get. > > Have a nice day, and thanks! > > > Martha Loescher, Secretary > Ohio Department of Natural Resources > Division of Watercraft > 2045 Morse Rd > Bldg a-3 > Columbus OH 43229 > Phone: 614-265-6774 > Email: [email protected] > > > > If you wish to unsubscribe from this list, visit: > > http://www.gwmicro.com/listserv -- Raul A. Gallegos GW Micro Technical Support And Product Specialist Voice 260-489-3671, Fax 260-489-2608 Web http://www.gwmicro.com If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv
