Tom,
Below is a Sapi 5 VB script example which will allow you to have
speech
and write vb script files and not use html at all. As long as you
computer
allows you to run VB script all you have to do is have a file with the
extension .VBS.
You can copy the stuff below or save the attachment and make sure the
file ends with .vbs. This will allow you to test most of your vb examples
if
you want. The stuff below uses the class method and after you reach the
class end statement you get into the body of the vb script. There you can
note the formats used to just do a test run of voices.
The .vbs file can be opened up in Notepad and you can make any kind of
file you want while you are learning.
Using the class method below and the format in the body beneath the
class to have any prompt messages sepak. Then you can teach yourself all
about .VBS. or scripting. Then get into the Windoweyes scripting after
you
have mastered VB scripting.
See the attached if it gets posted along with this email.
Bruce
'MODIFIED JUNE 30 2010 FOR voicelist redim, tts4 and tts5!
'JUNE 29 2010 FOR CLASS METHOD OF SAPI 5!
'JUNE 26 FOR ALL SPEECH METHODS!
Class createSapiObject
Private tts5
Private tts4
Private sapiQ
Private voices5count
Private voices4count
Private voice5list()
Private voice4list()
Private defaultspeed
Private pitch
Private defaultvolume
Private default_spk
Private sync
Private async
Private xml
Private isfile
Private no_xml
Private punc
Private Sub Class_Initialize
dim i
Set tts5 = CreateObject("sapi.spvoice")
tts5.Speak("")
Set tts4 = CreateObject("ActiveVoice.ActiveVoice")
tts4.Speak("")
sapiMode = 5
voices5count = tts5.GetVoices.Count
voices4count = tts4.CountEngines
if voices4count<=10 then
ReDim voice4list(10)
else
if voices4count<=20 then
ReDim voice4list(20)
else
if voices4count<=30 then
ReDim voice4list(30)
else
ReDim voice4list(40)
end if
end if
end if
if voices5count<10 then
ReDim voice5list(10)
else
if voices5count<20 then
ReDim voice5list(20)
else
if voices5count<30 then
ReDim voice5list(30)
else
ReDim voice5list(40)
end if
end if
end if
for i = 1 to voices4count
voice4list( i) = tts4.modeName( num)
next
for i = 0 to voices5count-1
voice5list( i) = tts5.GetVoices.Item( i).GetDescription
next
defaultspeed = 0
pitch = 0
defaultvolume = 100
default_spk = 0
sync = 1 'CONTINUOUS SPEECH!
async = 2 'STOP BEFORE SPEAK!
xml = 8 'USE XML TAGS!
isfile = 16 'OPEN WAV FILE WITH TEXT!
no_xml = 32 'IGNORE XML TAGS!
punc = 64 'SAY ALL PUNCTUATIONS!
End Sub
Public Property Get sapiMode
sapiMode = sapiQ
End Property
Public Property Let sapiMode( num)
sapiQ = num
End Property
Public Property Get voiceCount
if sapiQ = 5 then
voiceCount = voices5count
else
voiceCount = voices4count
end if
End Property
Public Property Get normRate
if sapiQ = 5 then
normRate = 0
else
normRate = defaultspeed
end if
End Property
Public Property Get normPitch
if sapiQ = 5 then
normPitch = 0
else
normPitch = defaultpitch
end if
End Property
Public Property Get normVolume
if sapiQ = 5 then
normVolume = 100
else
normVolume = defaultvolume
end if
End Property
Public Property Get getDefSpk
getDefSpk = default_spk
End Property
Public Property Get getSync
getSync = sync
End Property
Public Property Get getAsync
getAsync = async
End Property
Public Property Get getXml
getXml = xml
End Property
Public Property Get getIsFile
getIsFile = isfile
End Property
Public Property Get getNoXml
getNoXml = no_xml
End Property
Public Property Get getPunc
getPunc = punc
End Property
Public Property Get Value2Percent( current, min, max)
'ADJUST VALUE TO PERCENTAGE!
'MAX VALUE IF ERROR!
On Error Resume Next
Err.Clear
Value2Percent = int( round( abs( (current - min) / (max - min)) *
100.00, 2))
if Err.Number <> 0 then
Value2Percent = max
end if
End Property
Public Property Get getRate
if sapiQ = 5 then
getRate = tts5.Rate
else
getRate = Value2Percent( tts4.Speed, tts4.minSpeed,
tts4.maxSpeed)
end if
End Property
Public Property Get getPitch
if sapiQ = 5 then
getPitch = pitch
else
getPitch = Value2Percent( tts4.Pitch, tts4.minPitch,
tts4.maxPitch)
end if
End Property
Public Property Get getVolume
if sapiQ = 5 then
getVolume = tts5.Volume
else
getVolume = Value2Percent( tts4.VolumeLeft,
tts4.minVolumeLeft,
tts4.maxVolumeLeft)
end if
End Property
Public Property Get Percent2Value( percent, min, max)
'ADJUST PERCENTAGE to value!
Percent2Value = int( round( abs( percent / 100.00) * (max - min),
2)
+ min)
End Property
Public Property Let setRate( percent)
if sapiQ = 5 then
tts5.Rate = percent
tts5.Speak("")
else
Dim val, max
max = tts4.maxSpeed-1
val = Percent2Value( percent, tts4.minSpeed, max+1)
' SAPI4 DOES NOT LIKE MAX SPEED!
if val > max then
val = max
End If
tts4.Speed = val
tts4.Speak("")
end if
End Property
Public Property Let setPitch( percent)
if sapiQ = 5 then
pitch = percent
else
tts4.Pitch = Percent2Value( percent, tts4.minPitch,
tts4.maxPitch)
end if
End Property
Public Property Let setVolume( percent)
if sapiQ = 5 then
tts5.Volume = percent
tts5.Speak("")
else
Dim val
val = Percent2Value( percent, tts4.minVolumeLeft,
tts4.maxVolumeLeft)
tts4.VolumeLeft = val
tts4.VolumeRight = val
tts4.Speak("")
end if
End Property
Public Property Get getVoice
if sapiQ = 5 then
getVoice = tts5.Voice
else
getVoice = tts.currentMode
end if
End Property
Public Property Let setVoiceByNum( num)
if sapiQ = 5 then
Set tts5.voice = tts5.GetVoices.Item( num)
tts5.Speak("")
else
tts4.currentMode = num
tts4.Speak("")
end if
End Property
Public Property Get getVoiceNameByNum( num)
if sapiQ = 5 then
getVoiceNameByNum = tts5.GetVoices.Item( num).GetDescription
else
getVoiceNameByNum = tts4.modeName( num)
end if
End Property
Public Property Get getListVoiceNameByNum( num)
if sapiQ = 5 then
getListVoiceNameByNum = voice5list( num)
else
getListVoiceNameByNum = voice4list( num)
end if
End Property
Public Property Get getVoiceName
if sapiQ = 5 then
getVoiceName = tts5.voice.GetDescription
else
getVoiceName = tts4.modeName( tts4.currentMode)
end if
End Property
Public Property Let setVoiceByName( name)
Dim b, e, i, vn
name = LCase( name)
b=0
e = voices5count-1
if sapiQ = 4 then
b=1
e = voices4count
end if
for i = b to e
vn = LCase( getVoiceNameByNum( i))
if InStr( vn, name) then
setVoiceByNum = i
Exit Property
End If
next
End Property
Public Sub Talk(txt)
'VOICE IS SPOKEN IN SAPI 4 AND WAITS UNTIL VOICE IS DONE!
tts4.Speak txt
waitFlag = tts4.Speaking
Do While waitFlag
WScript.Sleep 10
waitFlag = tts4.Speaking
Loop
End Sub
Public Sub Speak( txt, flags)
if sapiQ = 5 then
tts5.Speak "<pitch absmiddle=""" & CStr( getPitch) & """>" &
txt
& "</pitch>", flags
else
talk txt
end if
' tts.Speak txt, flags
End Sub
End Class
' LETS START PROGRAM TEST FOR SAPI 5 VOICES!
Dim list, message, txt, i, p, parm, strVal
Set c = new createSapiObject
c.sapiMode = 5
' c.sapiMode = 4
'NOTE: SET LOOP FOR POINTER VALUES 0 OR 1 IN LIST!
c.Speak c.getVoiceName & " Is Speaking! This is the default Control Panel
voice.", c.getAsync and c.getXml
c.setPitch = 1
c.Speak " This is Sapi: " & c.sapiMode & " and there are " & c.voiceCount
&
" Voices!", c.getXml
list = ""
for count = 0 to 2 'c.voiceCount -1
c.setVoiceByNum = count
list = list & "(" & count & ") = " & c.getVoiceName & vbCrLf
c.setPitch = c.getPitch + 1
txt = count & " is: " & c.getVoiceName & "!"
c.Speak txt, c.getXml 'or c.getPunc
next
c.setVoiceByName = "mary"
c.setPitch = 0
c.Speak "Hi, " & c.getListVoiceNameByNum( 5) & "!", c.getXml
c.Speak "This is: " & c.getVoiceName & " and this is the end!", c.getXml
c.setVoiceByName = c.getListVoiceNameByNum( 9)
c.Speak "Who is this, " & c.getVoiceName & "?", c.getXml
c.setRate = -1
c.Speak "This is punctuation test and who is this, " & c.getVoiceName &
"?",
c.getXml or c.getPunc
c.Speak "<spell> Who is this, " & c.getVoiceName & "?</spell>", c.getXml
To: <[email protected]>
Sent: Saturday, August 21, 2010 9:36 PM
Subject: Re: Window-Eyes Script Writing
And therein lies the problem. I went to the first link and it focuses
strictly on using VBScript within web pages for Internet Explorer. It
tells
you that in order to understand the explanations and examples you must
first
understand html and xml. While we do use xml in our scripts, I thought,
were
I a beginner this would be mind boggling, reading VBScript code within
html
code. And the initial examples went straight to using COM automation.
Again,
were I a beginner, I'd be totally lost right from the get-go, think this
was
all just way over my head, and probably just give up.
Regards,
Tom
