Asteroid bases and space stations. Get some spare bits and pieces, and some chunks of styrofoam. Then prime them (coating the styrofoam beforehand so the primer doesn't melt your asteroid).
An old transistor radio has plenty of capacitors, resistors, wires, etc etc. Capacitors make great "habitat modules", and resistors "fuel tanks", for example. A single big piece of plastic card can be cut and glued in layers to make detailed blocky buildings, docking platforms, etc. Experiment a lot. You WANT failures. Once you have a few good ones, put them aside. Start with the parts that you would have thrown away, and glue those together in interesting ways. Practice your drybrushing, inking, etc on those. Then use the failures that were genuine attempts but didn't work out. Then graduate to your kit bashed stuff. Then you'll be ready for the real thing. Even then, do your pirates, commercial ships and such first, then your military fleet when you're sure of your paint scheme. I painted most of my fleets by doing a black spray primer, then a base coat of some theme color, then sometimes an ink coat of the same color, then two layers of drybrushing, then painting the details a contrasting color or two, and then (sometimes) drybrushing those, with a lighter version of the same color. I don't seal with varnish, though I know I should. It's the detail work (metallic probes and weapon turrets, red or yellow "operating lights", etc) that really helps turn an ok paint job into something really cool, and it's pretty easy too. I haven't painted a new fleet in a while, admittedly, but if you do them in an "assembly line" (ie do one step to your fleet before going back and doing the next step) then you get a very consistent fleet. If you jot down your methodology it helps so you do everything consistently. I know it will cause some controversy, but the GW site has some good painting instructions on their website, with pictures. The BFG rulebook goes step-by-step through a few different styles of painting ships. The best lesson in drybrushing I've gotten was watching Ryan actually do it. Seeing him do it once helped me avoid unpleasant mistakes. Even then, my first time I left too much on the brush. On 9/4/08, Mike Stanczyk <[EMAIL PROTECTED]> wrote: > On Thu, 4 Sep 2008, Fred Kiesche wrote: > > > Not sure if this would help...but are you priming first? > Yeah, black. > > I'm at wits end here gang. How do I learn this when I'm ruining minis > hand over fist? I only have a handfull resin ships, which I haven't seen > a way to strip them when I totally botch the paint job. The only other ships > I have are a set of new NSL from Jon. I'm not going near those again until > I get something that works. What do I practice on? > > How I got into this mess: > I went to the respected local game store and was pointed to the local > painting guru. He looked at what I wanted and what I had and suggested > drybrushing and said I should > prime in black then 3 drybrush layers: dark grey, medium grey, then light > grey. > > The dry brushing killed all the detail on the first mini. Hand painting > isn't much better. > > I just want a simple easy paint job that won't get me laughed at. > > Mike > > _______________________________________________ > Gzg-l mailing list > [EMAIL PROTECTED] > http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l > -- Robert Mayberry (678) 984-5113 [EMAIL PROTECTED] _______________________________________________ Gzg-l mailing list [EMAIL PROTECTED] http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ground Zero Games" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/gzg-group?hl=en -~----------~----~----~----~------~----~------~--~---
