Fred said: "When I got a bunch primed, I would put them on a piece of wood (2x4, for example), then put them in a low oven (200 degrees F) for 20 minutes. The relatively low heat plus time would cause the prime coat to "suck onto" the miniature, allowing a lot of detail to stand forth."
TomB: Doesn't lead and/or white metal have the kind of low melting point you can reach with a small electric hotplate? And any plastic or acrylic stuff would be dodgy for this (possibly resin too - something tells me it won't cook too well?). BTW - I'm always looking for good modelling tips for stargrunt.ca. Can I post this one? (With a disclaimer 'not to blame if your grav tank bursts into flame or you inhale toxic fumes!') -- "Now, I go to spread happiness to the rest of the station. It is a terrible responsibility but I have learned to live with it." Londo, A Voice in the Wilderness, Part I "To argue with a person who has renounced the use of reason is like administering medicine to the dead." -- Thomas Paine Thomas Paine _______________________________________________ Gzg-l mailing list [EMAIL PROTECTED] http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ground Zero Games" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/gzg-group?hl=en -~----------~----~----~----~------~----~------~--~---
