>Hi all,
>
>One of the things that I liked about the UNSC ships was that they were
>made of modular components. I just had some issue with some of the
>estetics. I've finally sat down at my table again and started dabling.
>I have some prototypes up on a gallery to look through right now and
>I'd appreciate some feedback. They're pretty rough, just setup for
>basic layout.
>
>http://picasaweb.google.ca/jaime.tiampo/Miniatures#
>
>There are two different setups for the fighter bay setup. A 6 launcher
>base and a 3 launcher base. The 3 launcher base can be stacked two
>deep as you will see in the photos to make a larger bay configuration.
>
>I'm still having a problem trying to get a decent curve to the styrene
>for the ring on the wings. I've experimented with heating it against a
>cylinder but had some issues with over heating it and having it warp.
>If anyone has some suggestions I'd appreciate it.


Some interesting ideas! For the wing-ring (!) I'd be more inclined to 
look for a piece of plastic piping of a suitable diameter and wall 
thickness that you could cut a thin slice from, so that the curve is 
already accurately formed. I'm sure there are some types of rigid 
pipe for plumbing use that are made in ABS or a similar glueable 
plastic?

Jon (GZG)

>
>
>Jaime
>
>
>It takes only one drink to get me drunk. The trouble is, I can't
>remember if it's the thirteenth or the fourteenth.
>     George Burns
>
>_______________________________________________
>Gzg-l mailing list
>[EMAIL PROTECTED]
>http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l


_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Ground Zero Games" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/gzg-group?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to